SOHC.co.uk Forums > CB750

swingarm help

(1/8) > >>

onethumb:
Hi all, only me again,

I've just cleaned my rear swingarm ready for powder coating and I know one of the bushes needs replacing so was going to do both but I've just seen that I'm missing the pivot thrust bush (don't remember removing it) and one of the rear fork felt rings is in a bad way, can anyone tell me where I can get these parts and any tips on removing the old ones.


thanks, Steve

Bryanj:
Replace both bushes and felts along with the pivot pin that wears more than the bushes, all Parts were available from Dave Silver but the pin is expensive. To get the bushes out use a padsaw or just a hacksaw blade to cut down the length and collape them inwards

onethumb:
Cheers bryanj, the pin looks in good nick, am I wrong to try it in the new bushes?
Also have you a link for the felt and the pivot thrust bushes, can't see them anywhere?

Thanks.

This is a top site. I'm loving the help.

royhall:
Should be able to find them from the part number. Which model CB750 have you got?

Bryanj:
bush 52108-300-300
thrust 52109-283-300
felt 52145-283-000
pivot 52141-300-300
cap 52144-283-010

Navigation

[0] Message Index

[#] Next page