SOHC.co.uk Forums > CB750

Front fork assembly

(1/2) > >>

El__burro:
Good year,
I have replaced the seal on both forks but I am in need of help.
I have followed a very easy process reassembly the inverse way as I disassembled it all.
My issue is the part in the picture number 14, its quite a thick ring between the seal and the circlip.
I have been trying to ensure that the circlip locks in its position but i am struggling, i have "punched it down" but not all the way; before I make a mess I thought I could ask for help.

please help!
El__burro

Bryanj:
Check the thickness of the new seals against the old as i think the later ones use modified thicker ones with no washer

Green1:
I used the thicker seals in my bike just discard the washer

Mick

El__burro:
Actually the new seals are thinner than the old ones.
I guess removing the 14 will not cure the problem.
thanks
see images attached.

El__burro:
All sorted!  Thanks to perseverance and some scrap metal I had in the shed.
Thanks
El___burro

Navigation

[0] Message Index

[#] Next page