SOHC.co.uk Forums > Project Board
1977 CB550
Valentinik:
I've not had much time to work on the bike since my last update due to moving house earlier in the year so my time has been filled with diy, gardening and lots less interesting things than getting this finish.
Earlier in the year i bought a set of cb500 carbs which i've stripped down to replace all of the serviceable parts and powder coat some pieces.
Over the last couple of days i've ordered a few bits to hopefully get the bike started for the first time (since i stripped it down). I've now fitted the oil pump along with the left had engine cover. Today some tappet caps and new ignition coils arrived. Ive got the coils fitted, just need to sort the spark plug leads out.
The carb bits and tappet caps should go to the powdercoaters within the next few weeks and then i can hopefully make a start on getting it started.
Mike
Valentinik:
While waiting for the rest of my ignition system to arrive i test fitted the stop tail light that i made. The housing is made from aluminium and the lamp itself is held in with stainless mesh and a stainless circlip.
Navigation
[0] Message Index
[*] Previous page
Go to full version