SOHC.co.uk Forums > CB350/400

CARB OVERFLOW FROM BOWL TUBES

<< < (3/3)

royhall:
Thanks for that Watty, never been an inspiration before. Glad it helped though. Cheers Roy.

Greg65:
Thanks for asking that question Watty, just come in from the garage with the same problem. Heading out to remove the carbs and recheck, by the way is there an easy way to remove 400 carbs and air manifold?

Greg

watty51:
When you've took the carbs on and off as many times I have ( think I could do it with a blindfold on) you just get use to squeezing this bit in here 1st, then this bit in 2nd...so on.
I have got a 350f but always take out the air manifold the right hand side but watch out for the overflow point on the bottom of the manifold.
The carbs basically, undo 4 retaining clips and pull/wiggle back. TAKE YOUR TIME WITH THIS BIT they will come off eventually
Not much help i know but once off just make sure you take lots of photos of the insides of the carbs and keep everything in order.

ST1100:

--- Quote from: Greg65 on January 25, 2016, 10:31:33 AM ---...is there an easy way to remove 400 carbs and air manifold?

--- End quote ---
On my 500/4 I found it helpful to gentle warm the isolators with a heat-gun...

Navigation

[0] Message Index

[*] Previous page