SOHC.co.uk Forums > CB500/550

550 k3 inlet manifold rubber clamps

<< < (2/2)

Bryanj:
They are 500 or 550F and you have no chance of getting the original carb to airbax to fit, you need K3 ones(550K0,K1 and K2 are same as 500)

Trigger:
You need the ones for PD carbs if, it has PD carbs fitted to the K3.

totty:
I can't get the original carb to airbox to fit even after refitting the original carb to inlet.

Yes it does have PD carbs.

This is one of those if it ain't broke don't fix it jobs that I never should have started. I bought 50 O rings for the tappet covers as it was cheaper than buying 8 so I decided to change the inlet ones, then I thought while I'm on I might as well replace the inlet rubbers. Total waste of time, but the only other things the bike needs is paint which it's too cold for (and I've just bought a better tank) and maybe chrome on some small parts but I'm not aiming to get it spotless.

I should sell it and ride my trials bike instead of tinkering, more satisfying and better exercise.

totty:
Partial refund agreed, so at least the service was ok.

Navigation

[0] Message Index

[*] Previous page