SOHC.co.uk Forums > CB750

Carb rebuild

<< < (2/2)

JamesH:

--- Quote from: mgy66 on January 28, 2016, 04:29:00 PM ---2 pieces broken before I stopped with the idea of taking them out... Yes, I am kind of preparing myself to that idea but I want to get clarity on what is the function of this part and whether I can leave w/o it.

Also, I can by some dust caps 16032-300-004 that go on the connection between the lever and the adjuster screws from 1976 models but I wonder if that can be mounted on K1 and if it would achieve the same function.

Thanks for your thoughts and will chase ebay...
Best,
Marc

--- End quote ---

That part number you've quoted is for the complete throttle rod assy, not the dust boot.

Do you mean this part?: 16154-300-004 (http://www.cmsnl.com/honda-cb750k6-four-usa_model14380/cap-dust_16154300004/#.VqpH0fmLSHs)

mgy66:
sorry, yes that the one called dust cap but I am not sure it achieve the same function than the static one. I think the damaged one ensure no air leakage at the passage of the rod. so bit more than a dust cap. it is annoying to see that the gasket is still in productuin with the carbs rebuild kit but w/o these rubbers... maybe they are not so critical and would be fine w/o.
best,
mgy

Navigation

[0] Message Index

[*] Previous page