SOHC.co.uk Forums > CB350/400
Gearbox blanking seal.
Bodd:
I don't know if anyone has ever replaced one in situ but if it was me I would give it a try, it looks like the tab isn't too big or too far from the edge so I would put it in at an angle locating the tab first then tap it into place, I would also put a smear of Hylomar on it.
dave400:
I'm sure that plug is rubber formed over a metal cup, I remember it was not very flexible when I replaced it during my 400 engine rebuild....it will probably be a job and a half putting a new one in and not deforming it.
Bodd:
You are right about the metal cup dave400, this is what it looks like on the DS website, I would still be tempted to have a go though.
[ Guests cannot view attachments ]
Bryanj:
Sorry not worth wrecking a gearbox trying to do a half assed job
Bodd:
How is it going to wreck the gearbox ? It doesn't move, doesn't affect any moving parts and if nothing leaks past it it is doing it's job.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version