SOHC.co.uk Forums > CB500/550

I found this in my sump

<< < (3/3)

mike the bike:
You'll need a torque wrench to reassemble it correctly,  not to mention gaskets, Hylomar.  Budget for things that you may find that are worn like the camchain,  snapped bolts,  bearings etc.
Good luck with it

matthewmosse:
I did my first cb550 engine in a shed, stood in a puddle of water with an old sideboard as a workbench. Took a weekend including removing it and putting it back in. These days I would be a bit more carefull being as bits cost more.

Navigation

[0] Message Index

[*] Previous page