SOHC.co.uk Forums > CB350/400

Anyone selling a set of cylinder barrels

(1/2) > >>

Laverda Dave:
Due to my existing cylinder bores being oversize and also being unable to obtain any 0.75 or 1.0mm oversize pistons to suit I'm on the lookout for a set of used barrels.  I really don't want to go down the expensive re-lining or big bore route, I'd like to keep the bike as standard as I can if possible.

Finish is unimportant but if possible I would like all the fins to be intact and the bores to be either worn standard or 0.25 to enable me to get a .05 re-bore if I have to. I've have tried e-bay and all the usual breakers but there's nothing available.
If anyone has a set let me know and we can negotiate a price.

Hope someone out there has something suitable to get one of these bikes back on the road  :)

Dave

MCTID:
Hi .......try this E Bay item 172067393971.

I know it is damaged but with a good welder and /or machinist it could be refurbished and at £50 might suit your purposes.

You would have to verify the bore dimensions first, but probably worth a punt if it can be rebored.

I have no affiliation with Stoneage motorcycles.....but hope this post helps.

Keep us updated please.....good luck.

ka-ja:
Could try      http://www.ebay.co.uk/itm/Honda-CB400F-400-Four-400-4-barrels-and-50-OS-pistons-/262311549293?hash=item3d12fc996d:g:Dh8AAOSwezVW0yVI

             Only 7 hours left as of sun morning!

MCTID:
Oooops......ref my earlier post....sorry I thought it was CB 750 Barrels you were after.

My apologies.......

Chris400F:
What about these pistons?
http://www.yamiya750.com/index.php?main_page=product_info&cPath=179_273_206_209&products_id=2837
The page says "O.50 OVERSIZE, 1.00 OVERSIZE, 1.50 OVERSIZE are available", don't know how the price would work out.

Navigation

[0] Message Index

[#] Next page