This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Pauarc
16
« on: August 21, 2024, 08:26:47 AM »
I change my front brake to twin disc much better
17
« on: July 21, 2024, 01:40:48 PM »
On the k2 it has 2 holes for the fuel pipe as 2 goes through housing
18
« on: July 20, 2024, 06:31:44 PM »
I think the fuel pipe should go through the carb housing
19
« on: July 12, 2024, 06:25:33 PM »
No I strip the head off didn’t want to take the chance of getting any thing in barrels
20
« on: July 11, 2024, 03:59:21 PM »
Used stud lock to hold the sleeve in place and help seal the thread
21
« on: July 10, 2024, 07:32:08 PM »
Engine back in bike and running just got to go for test run
22
« on: July 10, 2024, 04:11:26 PM »
So is it best to set at fully advanced with the strobe
23
« on: July 10, 2024, 03:12:45 PM »
When timing is set to f mark and then open throttle it’s not reaching fully advance
Mark any ideas on this
This was Set with strobe light
24
« on: June 30, 2024, 12:41:55 PM »
The engine is ready to lift out then the head will be coming off to do the job will then see what needs to be done
25
« on: June 29, 2024, 11:02:43 AM »
Trouble is, it’s number two cylinder and you can’t get straight onto it very easy
26
« on: June 29, 2024, 10:00:25 AM »
Out last night all going okay then I could hear a hissing noise from the front of the engine look this morning blown a spark plug thread looks like I’ve got to take engine out not a great night any one use the spark plugs inserts where you re-tap it and put an insert in
27
« on: June 03, 2024, 10:34:04 AM »
Just checked tensioner and the reading is 67.8 so I think it’s good to go the tension wheel is good no marks
28
« on: May 28, 2024, 11:39:24 AM »
Thanks for the help will have to drop the pan and see
29
« on: May 27, 2024, 08:11:14 PM »
How many miles should a chain and tensioner do approximately
30
« on: May 27, 2024, 07:51:39 PM »
That’s what I was hoping
|
Show Posts
