Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: AshimotoK0 on April 29, 2016, 08:58:48 PM
-
;) ;) ;) ;D ;D
http://www.ebay.co.uk/itm/Honda-CB500-Four-Fuse-Holder-/201572019179?hash=item2eeea0ebeb:g:K1MAAOSwdGxXI6tQ
-
Nothing wrong with my fleabay camera that I paid 99p for ;D ;D ;D
-
Thats not to bad when you consider how long it took to learn how to post a pic on here ;D
-
I'll do you some photos when i back from my holls trig ;D ;D ;D
-
Special offer to Sohc members is £25 +P&P and a donation to the forum ;D ;D
-
Bikini shots holding the fuse holder come to mind :o
-
Bikini shots holding the fuse holder come to mind :o
I can't ask RGP to do that ;D ;D ;D
-
Never met RGP so it would be good to put a face to the name ;D
-
He does better photos than me.
-
But does he look good in a bikini?
-
I'd pay a fiver but £17.50 for a bit of rubber!!!
-
I'd pay a fiver but £17.50 for a bit of rubber!!!
Give him a break . He has a lady with expensive tastes to keep sweet. :D :D :D
-
I'd pay a fiver but £17.50 for a bit of rubber!!!
Give him a break . He has a lady with expensive tastes to keep sweet. :D :D :D
Steady on Ash, he would have to sell millions of them just to keep me in designer handbags ;D ;D ;D ;D. But, I'm an independent Woman, always have been and always will be so I will manage I'm sure even if he doesn't sell any !!!.
I don't think the fuse holders are too expensive actually, for something that has not been available for 20+years and could just finish off a restoration very nicely, I think there are worth every penny.
-
;) ;) ;) ;D ;D
http://www.ebay.co.uk/itm/Honda-CB500-Four-Fuse-Holder-/201572019179?hash=item2eeea0ebeb:g:K1MAAOSwdGxXI6tQ
At least I have a photo up, can't stand sellers who put stuff on ebay without any pictures whatsoever ;) >>> http://www.ebay.co.uk/itm/Used-LUCAS-Schaevitz-MP-1000-LVDT-readout-controller-/141952961610?hash=item210d0e4c4a:i:141952961610
-
I'd pay a fiver but £17.50 for a bit of rubber!!!
Are you aware of the costs involved ?
R&D ?
Making the mould ?
Materials ?
Sourcing the parts ?
Advertising ?
P&P costs ?
Time ?
These parts do not just grow like apples on trees ;)
-
I'd pay a fiver but £17.50 for a bit of rubber!!!
Are you aware of the costs involved ?
R&D ?
Making the mould ?
Materials ?
Sourcing the parts ?
Advertising ?
P&P costs ?
Time ?
These parts do not just grow like apples on trees ;)
Sounds like a quote from yer mate Dave Silver Trig ;D ;D ;D ;D ;D ;D ;D
[attachimg=1]
-
I'd pay a fiver but £17.50 for a bit of rubber!!!
Are you aware of the costs involved ?
R&D ?
Making the mould ?
Materials ?
Sourcing the parts ?
Advertising ?
P&P costs ?
Time ?
These parts do not just grow like apples on trees ;)
Sounds like a quote from yer mate Dave Silver Trig ;D ;D ;D ;D ;D ;D ;D
(Attachment Link)
Just found another one Ash>>> http://www.ebay.co.uk/itm/HONDA-SL350-K-CARBURETOR-NEEDLE-TWO-OFF-NOS-IN-HONDA-BAG-NEEDLE-273001-/141958414149?hash=item210d617f45:i:141958414149 ;) ;D ;D ;D
2-0 to me ;D ;D ;D
-
'kin bargain mte they are Genne. but you can have em for a fiver post free !
-
Does anyone have a set of NOS HM300 pipes they can sell me? I'm only prepared to pay £125 plus post...
Seriously, a lot of time and effort had gone into producing what is an obsolete part. £17.50 is a bargain.
-
Sounds like a bargain to me too. I'm after two for my 750's and there £25 each :o
-
Graham I hope you had the rubber analyzed and made to the exact spec ;D
-
Does anyone have a set of NOS HM300 pipes they can sell me? I'm only prepared to pay £125 plus post...
Seriously, a lot of time and effort had gone into producing what is an obsolete part. £17.50 is a bargain.
How many sets do you want James? Chris in Japan says he can get you as many as you want for that price.
They are for this Model: ;D
http://www.ebay.com/itm/1-6-scale-Honda-Dream-CB750-FOUR-Plastic-Model-Kit-Japan-BIKE-/131209313609
-
hi Trigger,
as a user of one of your excellent steel clutch pushrod,(CB500) ,I had to remove the drive cover the other day,and found
the push rod seemed to magnetic !! the little ball bearing was on its end,instead of deep in the actuation mech,
on assembly I greased the hole and pushed the ball back,
if it happens again,just a warning as it would be a pain to loose the steel ball,
-
hi Trigger,
as a user of one of your excellent steel clutch pushrod,(CB500) ,I had to remove the drive cover the other day,and found
the push rod seemed to magnetic !! the little ball bearing was on its end,instead of deep in the actuation mech,
on assembly I greased the hole and pushed the ball back,
if it happens again,just a warning as it would be a pain to loose the steel ball,
Cheers for the feedback John. I tested the rod over 3,000 miles and had no problems. Not sure how the silver steel rod has become magnetised but, if you lose the ball I will send you another FOC.
-
hi Trigger,
as a user of one of your excellent steel clutch pushrod,(CB500) ,I had to remove the drive cover the other day,and found
the push rod seemed to magnetic !! the little ball bearing was on its end,instead of deep in the actuation mech,
on assembly I greased the hole and pushed the ball back,
if it happens again,just a warning as it would be a pain to loose the steel ball,
Cheers for the feedback John. I tested the rod over 3,000 miles and had no problems. Not sure how the silver steel rod has become magnetised but, if you lose the ball I will send you another FOC.
if I got a spare,I would have a fine shiny pair !!!
-
hi Trigger,
as a user of one of your excellent steel clutch pushrod,(CB500) ,I had to remove the drive cover the other day,and found
the push rod seemed to magnetic !! the little ball bearing was on its end,instead of deep in the actuation mech,
on assembly I greased the hole and pushed the ball back,
if it happens again,just a warning as it would be a pain to loose the steel ball,
Cheers for the feedback John. I tested the rod over 3,000 miles and had no problems. Not sure how the silver steel rod has become magnetised but, if you lose the ball I will send you another FOC.
if I got a spare,I would have a fine shiny pair !!!
Well, I know not to offer you any polishing ;D ;D ;D