Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: PHILIP2908 on June 18, 2016, 09:33:18 AM

Title: Whats this??
Post by: PHILIP2908 on June 18, 2016, 09:33:18 AM

Hello Chums,
I was a bit peed off to spend £40 on a set of gaskets from DS only to find that some O rings are missing; like the crucial ones between the barrels and head.
However, also got some rubber oil seals and don't know what they are for; don't remember seeing these on the strip down.
They are soft rubber rings about 8mm high and 15mm in diameter and there are 8 of them.
Any ideas?
Thanks in advance.

Title: Re: Whats this??
Post by: yozzer74 on June 18, 2016, 10:28:28 AM

They go round your notch pins  depends what model yours is to how many you use

Title: Re: Whats this??
Post by: yozzer74 on June 18, 2016, 10:31:10 AM

Number2 in picture

Title: Re: Whats this??
Post by: PHILIP2908 on June 18, 2016, 11:14:23 AM

Hi Yozzer, thanks for the reply.
Don't think I've got any of those; just got 2 big dowels (part no 11) at each front stud.
What happens if these are left out?
Didn't find any when I took it apart....
Cheers
Phil

Title: Re: Whats this??
Post by: royhall on June 18, 2016, 12:10:14 PM

They don't belong in the K2 engine, they are for the F2.