Honda-SOHC
Other Stuff => Misc / Open => Topic started by: Johnny4428 on July 15, 2016, 08:41:18 PM
-
Hi all. During my rebuild of my cb550k3 engine I found myself short of the large valve Spring seating washers by the tune of 6 wtf....Thing is when ordering spares I had ordered 2 in case there was ones missing, still short of four! Since sorted. When I was replacing rocker cover found to be short of 1 dowel, despite relevant labelled tubs with all parts, at least that is what I thought. But great improvisation with the help of a good 10mm drill bit now 16mm shorter than it should be. Nevertheless very happy to have replaced valves and that pesky little collets without losing any. After 6 months of being p....d off with one or two things that didn't quite go to plan I am finally seeing the project progress.
-
Anyone know if these valve Spring seating washers are the same as 350/400 fours? I have a couple of complete heads for those and Johnny is also in Orkney.
Ian
-
The Part Numbers for the washers for the 550F are the same as those for the 400.
Inner is 14775-107-000, outer is 14776-107-010.
Don't have a Parts List for the K3 but a quick look on CMSNL shows they are also the same.
-
Brill, many thanks Chris,
I'll pm Johnny and tell him the news, hope he checked that he hasn't got 2 in anyplace,
Ian