Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: mike the bike on April 14, 2017, 03:34:24 PM

Title: Valve guide seals
Post by: mike the bike on April 14, 2017, 03:34:24 PM

In the gasket set (from DSS)  there's 8 valve guide seals, as one would expect.   I've replaced the inlet seals but are there seals on the exhaust valve guides?  The reason for the confusion is;

• There's no old seals fitted
• The valve guides don't have a sharp edge to keep the seals on properly.

I've done two before the penny dropped.
Ta

Mike

Title: Re: Valve guide seals
Post by: kevski on April 14, 2017, 04:22:06 PM

On the earlier 350 motors none on the exhaust side.

Title: Re: Valve guide seals
Post by: mike the bike on April 14, 2017, 04:49:50 PM

OK, thanks.  I won't waste any more time on it.