Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: kew on April 23, 2017, 05:12:52 PM

Title: Big end bearing - metal selection table
Post by: kew on April 23, 2017, 05:12:52 PM

I've never really noticed before because I always measure my crank pins and never use standard rods but,
In the table the marking is shown as 1-2-3 but in the list downwards showing the oil clearance and shell colour the pins are 3-4-5.
Am I missing something?

Title: Re: Big end bearing - metal selection table
Post by: Bryanj on April 23, 2017, 06:13:46 PM

What bike?

Title: Re: Big end bearing - metal selection table
Post by: kew on April 23, 2017, 08:25:50 PM

CB750

Title: Re: Big end bearing - metal selection table
Post by: neilg on April 27, 2017, 08:12:03 PM

It's just how Honda marked the rods and crank to cross reference the shell size for that particular crank pin and rod combination. It could have bee ABC /XYZ or whatever they just chose that combination.