Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: billdn on September 05, 2018, 06:25:15 PM

Title: fitting the clutch
Post by: billdn on September 05, 2018, 06:25:15 PM

I'm about to reassemble and install the new clutch. Any tips? I've seen mention of clutch tool on DS parts list, can it be done without it or is it worth the investment to save time and skinned knuckles? Also what does " sprag" the clutch mean? Or is there a historic link?Cheers🙂

Title: Re: fitting the clutch
Post by: Nurse Julie on September 05, 2018, 06:36:12 PM

Have you soaked the plates in oil for a couple of days? (friction plates that is) Make sure all static plates are totally rust free and fit these with the bevelled edge facing outwards.

Title: Re: fitting the clutch
Post by: billdn on September 05, 2018, 06:43:33 PM

Soaking now for several days. Done that bit right then!

Title: Re: fitting the clutch
Post by: Nurse Julie on September 05, 2018, 06:45:41 PM

Quote from: billdn on September 05, 2018, 06:43:33 PM

Soaking now for several days. Done that bit right then!

👍👍👍