Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: AshimotoK0 on May 04, 2020, 12:20:27 PM

Title: Thread size CB500K1 carb inlet vacuum gauge takeoff ?
Post by: AshimotoK0 on May 04, 2020, 12:20:27 PM
As title anyone know the thread size?
Title: Re: Thread size CB500K1 carb inlet vacuum gauge takeoff ?
Post by: Trigger on May 04, 2020, 01:27:53 PM
Quote from: AshimotoK0 on May 04, 2020, 12:20:27 PM
As title anyone know the thread size?

M5 and 6mm long  ;)
Title: Re: Thread size CB500K1 carb inlet vacuum gauge takeoff ?
Post by: AshimotoK0 on May 04, 2020, 01:46:44 PM
Quote from: Trigger on May 04, 2020, 01:27:53 PM
Quote from: AshimotoK0 on May 04, 2020, 12:20:27 PM
As title anyone know the thread size?

M5 and 6mm long  ;)

Cheers !  Is it M5 coarse or fine pitch though Graham?
Title: Re: Thread size CB500K1 carb inlet vacuum gauge takeoff ?
Post by: Trigger on May 04, 2020, 06:47:06 PM
Quote from: AshimotoK0 on May 04, 2020, 01:46:44 PM
Quote from: Trigger on May 04, 2020, 01:27:53 PM
Quote from: AshimotoK0 on May 04, 2020, 12:20:27 PM
As title anyone know the thread size?

M5 and 6mm long  ;)

Cheers !  Is it M5 coarse or fine pitch though Graham?

I am not telling you, or they all will want to know  :o
Title: Re: Thread size CB500K1 carb inlet vacuum gauge takeoff ?
Post by: AshimotoK0 on May 04, 2020, 08:27:32 PM
Quote from: Trigger on May 04, 2020, 06:47:06 PM
Quote from: AshimotoK0 on May 04, 2020, 01:46:44 PM
Quote from: Trigger on May 04, 2020, 01:27:53 PM
Quote from: AshimotoK0 on May 04, 2020, 12:20:27 PM
As title anyone know the thread size?

M5 and 6mm long  ;)

Cheers !  Is it M5 coarse or fine pitch though Graham?

I am not telling you, or they all will want to know  :o

Boo Hoo ! crying into my beer  ;D ;D ;D
Title: Re: Thread size CB500K1 carb inlet vacuum gauge takeoff ?
Post by: paulbaker1954 on May 06, 2020, 08:43:30 AM
Put a thread gauge on the screw if you have one unless Graham relents and coughs up😂😂😂
Title: Re: Thread size CB500K1 carb inlet vacuum gauge takeoff ?
Post by: Safo on May 13, 2020, 11:27:27 AM
Made these the other day, hope to be trying them out in a week or so
Title: Re: Thread size CB500K1 carb inlet vacuum gauge takeoff ?
Post by: mike the bike on May 13, 2020, 01:31:48 PM
M5 x 0.8