Honda-SOHC

Other Stuff => Misc / Open => Topic started by: AshimotoK0 on September 29, 2020, 11:36:38 AM

Title: Emergency repair to tree loppers .. guess the Honda bit !
Post by: AshimotoK0 on September 29, 2020, 11:36:38 AM

Needs must  ;D :-[  Work really well now too  ;)

[attachimg=1]

Title: Re: Emergency repair to tree loppers .. guess the Honda bit !
Post by: Johnny4428 on September 29, 2020, 11:44:21 AM

Footrest rubbers?

Title: Re: Emergency repair to tree loppers .. guess the Honda bit !
Post by: Athame57 on September 29, 2020, 11:48:38 AM

Gear selector?

Title: Re: Emergency repair to tree loppers .. guess the Honda bit !
Post by: AshimotoK0 on September 29, 2020, 12:09:34 PM

All wrong so far ..1st reply was closest though  :)

Reported here before that Cathy once used a CB750K0 con-rod for hammering in a mirror mounting nail.  >:( >:(

Title: Re: Emergency repair to tree loppers .. guess the Honda bit !
Post by: Johnny4428 on September 29, 2020, 03:29:39 PM

Ah! Kickstart rubbers?

Title: Re: Emergency repair to tree loppers .. guess the Honda bit !
Post by: K2-K6 on September 29, 2020, 03:34:28 PM

Rear footpeg mount/pivot "thingy"  :)

Title: Re: Emergency repair to tree loppers .. guess the Honda bit !
Post by: boilermaker1 on September 29, 2020, 03:35:44 PM

engine mount?

Title: Re: Emergency repair to tree loppers .. guess the Honda bit !
Post by: Laverda Dave on September 29, 2020, 04:01:43 PM

The bolts that hold the footrest rubbers to the metal extension (you know the bit, it's stops the footrest rubber from bending!).
If not that it's a full sloper engine attached to the handle but out of shot!

Title: Re: Emergency repair to tree loppers .. guess the Honda bit !
Post by: Moorey on September 29, 2020, 04:39:10 PM

Footrest mount used as the anvil on the loppers.

Title: Re: Emergency repair to tree loppers .. guess the Honda bit !
Post by: AshimotoK0 on September 29, 2020, 08:54:13 PM

Yea ..pillion footrest mounting ..not sure which model but not 175 sloper as that model has brackets welded onto the swinging arm.