Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: captaindonutbikes on December 11, 2009, 10:43:47 AM

Title: off to be blasted
Post by: captaindonutbikes on December 11, 2009, 10:43:47 AM

(http://i999.photobucket.com/albums/af117/donutbikes/Honda%20CB550%20rebuild/CIMG2179.jpg)

This little lot has gone to the land of beads to be blasted.

best get on with the frame then  ;D

(http://i999.photobucket.com/albums/af117/donutbikes/Honda%20CB550%20rebuild/CIMG2186.jpg)

Title: Re: off to be blasted
Post by: Seamus on December 11, 2009, 11:00:01 PM

As if you dont know, make sure that it is all clean of media prior to re assembly. This stuff gets everywhere.

Did the same on my k1 (750) as I managed to acquire some plastic media for the blaster at work. Even masking everything off, I still found beads inside castings.

You will be well pleased with the results though.

Title: Re: off to be blasted
Post by: captaindonutbikes on December 12, 2009, 09:37:00 AM

Oh yeah, will be clean it all for fookin ages but will make it shine all the better.   ;D