Honda-SOHC

SOHC.co.uk Forums => SOHC Singles & Twins => Topic started by: Madagas2002 on March 16, 2023, 09:28:29 PM

Title: Cb360 1976 Right hand switch
Post by: Madagas2002 on March 16, 2023, 09:28:29 PM

Hi
I've re-soldered my wiring to the right hand switch
Someone had previously just cut them off.
I've been left with a brown/blue and a black wire.
Can I please ask for help on where these wires should go.
Thanks in advance
John

Title: Re: Cb360 1976 Right hand switch
Post by: Oddjob on March 16, 2023, 10:55:59 PM

Black goes into any black connector on the loom. It's the switched feed for the kill switch.

Oddly the brown/blue also goes into a black connector, no idea why Honda did this but it's the feed to the tailight fuse in the fuse box, very odd.

Title: Re: Cb360 1976 Right hand switch
Post by: Bryanj on March 16, 2023, 11:35:36 PM

Do you mean where do they go in the switch or where in the headlamp?

Title: Re: Cb360 1976 Right hand switch
Post by: Madagas2002 on March 17, 2023, 07:41:29 AM

Hi,
Thanks for your interest.
Yes, it's at the switch.
I've soldered the white stripe/black twin wire to the cut out switch.
I'm left with the black and blue/brown.
Thanks again
John

Title: Re: Cb360 1976 Right hand switch
Post by: Bryanj on March 17, 2023, 09:42:18 AM

I used to have a genuine Honda manual for that but not sure if i still have for wiring diagram.
Is this an original UK one?