Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: McCabe-Thiele (Ted) on April 28, 2023, 05:21:47 PM

Title: 500 wiring loom frame fitting pics.
Post by: McCabe-Thiele (Ted) on April 28, 2023, 05:21:47 PM
When I was fitting the  new loom to my 400 there were some lovely photos of how the wiring & cables flowed around the frame.
Are there any similar sketches for the 500 - I've looked in Ash's dropbox & the manuals without success?
My loom looks pretty good I just need to tidy up the outer bindings here & there etc.

Photo below shows where my loom was routed before strip down so need to tidy it all up.

.(https://live.staticflickr.com/65535/52853066237_25c247b2e6_o.jpg) (https://flic.kr/p/2owrMdH)500 loom routes (https://flic.kr/p/2owrMdH) by Macabe Thiele (https://www.flickr.com/photos/187487200@N03/), on Flickr
Title: Re: 500 wiring loom frame fitting pics.
Post by: Johnny4428 on April 28, 2023, 05:34:01 PM
Nothing to do with me Ted, but a loom that age I would completely strip off outer binding to visually inspect all wires. Did that with the 550 and ended up replacing a couple of wires.
Title: Re: 500 wiring loom frame fitting pics.
Post by: McCabe-Thiele (Ted) on April 28, 2023, 05:52:13 PM
Nothing to do with me Ted, but a loom that age I would completely strip off outer binding to visually inspect all wires. Did that with the 550 and ended up replacing a couple of wires.

Sound logic - there are not expensive  to replace on the grand  scale of rebuilds.
Title: Re: 500 wiring loom frame fitting pics.
Post by: Deano400 on April 28, 2023, 05:52:56 PM
Ted,

Go to this site and download the CB500-550-K-Shop-Manual. Has a couple of diagrams from page 146. Might be helpful.

https://www.honda4fun.com/modelli/cb500
Title: Re: 500 wiring loom frame fitting pics.
Post by: McCabe-Thiele (Ted) on April 28, 2023, 06:18:19 PM
Ted,

Go to this site and download the CB500-550-K-Shop-Manual. Has a couple of diagrams from page 146. Might be helpful.

https://www.honda4fun.com/modelli/cb500

Thanks for the page number Deano best pic I've seen so far.
Title: Re: 500 wiring loom frame fitting pics.
Post by: andy120t on April 28, 2023, 06:27:55 PM
I seem to recall an assembly thread from the U.S. Site with loads of detail piccies  of everything.It might have some pointers?

 http://forums.sohc4.net/index.php?topic=151576
Title: Re: 500 wiring loom frame fitting pics.
Post by: McCabe-Thiele (Ted) on April 28, 2023, 07:27:26 PM
Thanks Andy some great pics on that link -  looks like he has Ken's Syndrome - hyper polishing unless it's American soft focus photography.
Title: Re: 500 wiring loom frame fitting pics.
Post by: Oddjob on April 28, 2023, 10:44:56 PM
I was doing it before him, he did a decent job of restoring that bike.
Title: Re: 500 wiring loom frame fitting pics.
Post by: andy120t on April 29, 2023, 06:53:03 AM
The forks are incredible - super-polisher!
Title: Re: 500 wiring loom frame fitting pics.
Post by: Johnny4428 on April 29, 2023, 10:14:38 AM
That’s a very useful pictorial record of assembly.
Title: Re: 500 wiring loom frame fitting pics.
Post by: deltarider on May 07, 2023, 03:18:55 PM
Ted, check the fat green wire is connected to the frame for good ground.