Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: Mark sharman on June 13, 2024, 04:10:02 PM

Title: 550 k0 1974 tool tray /filter inlet .ignition holder bracket.
Post by: Mark sharman on June 13, 2024, 04:10:02 PM: Hi All
Just wondering if anybody has any of the above mention bits hidden away and looking for a new home.
these were missing from my bike when I bought it.
I may have to fabricate a bracket if not. I did see some one on eBay selling a copy but he was in Brazil (not so sure about that).
any help would be well rewarded.
TIA
Title: Re: 550 k0 1974 tool tray /filter inlet .ignition holder bracket.
Post by: Bryanj on June 13, 2024, 05:31:09 PM: Not clear wether you want the plastic bits or the brackets
Title: Re: 550 k0 1974 tool tray /filter inlet .ignition holder bracket.
Post by: Mark sharman on June 13, 2024, 06:34:22 PM: need the plastic tool tray which is also the filter lid which also has the wire mesh and rubber oblong seal.
also the bracket that holds the ignition switch , which is under the tank on the left hand side bolted to the down tube of the frame.
Title: Re: 550 k0 1974 tool tray /filter inlet .ignition holder bracket.
Post by: Bryanj on June 13, 2024, 08:28:30 PM: Both of those are rocking horse poo and if you find them will cost
Title: Re: 550 k0 1974 tool tray /filter inlet .ignition holder bracket.
Post by: McCabe-Thiele (Ted) on June 13, 2024, 09:31:28 PM: It's the sot of thing Ken might have in his loft?
Title: Re: 550 k0 1974 tool tray /filter inlet .ignition holder bracket.
Post by: DomP on June 13, 2024, 09:35:51 PM: Quote from: Mark sharman on June 13, 2024, 06:34:22 PM
need the plastic tool tray which is also the filter lid which also has the wire mesh and rubber oblong seal.
also the bracket that holds the ignition switch , which is under the tank on the left hand side bolted to the down tube of the frame.

Roo may have the tool tray/filter lid
Title: Re: 550 k0 1974 tool tray /filter inlet .ignition holder bracket.
Post by: Laverdaroo on June 14, 2024, 01:34:05 AM: Iâ€™ve got the lid and the oblong rubber and mesh holder and more than likely the fuse holder tooâ€¦â€¦ I know of a site in the US that has the key barrel holders on a row of bikes I took mine from

Sent from my iPhone using Tapatalk
Title: Re: 550 k0 1974 tool tray /filter inlet .ignition holder bracket.
Post by: Mark sharman on June 14, 2024, 02:49:24 PM: Laverdaroo
That would be great if you have .let me know price and postage etc.do you require my email address?
Title: Re: 550 k0 1974 tool tray /filter inlet .ignition holder bracket.
Post by: Laverdaroo on June 14, 2024, 04:49:23 PM: Bung me a pm with your email and phone number and if youâ€™re on wattsapp and Iâ€™ll pop you some piccies over.

Cheers and bestest regards

Roo

Sent from my iPhone using Tapatalk