Honda-SOHC
SOHC.co.uk Forums => The Black Bomber Board => Topic started by: AshimotoK0 on July 12, 2024, 09:41:22 PM
-
My 1967 CB450K0 Black Bomber is the ultimate jigsaw puzzle in that it came basically in a load of storage boxes left in a Crawley back garden for God knows how long and everything was totally stripped down, including the engine.
The main post is about fasteners so skip the following waffle if you like, about the project in general. :-[
I have gathered parts over the past 7 years for this bike, like NOS period DID rims, NOS Genuine Honda silencers, NOS seat, front guard etc. etc. so it will be a lovely example if I ever get it finished. I painted it myself last year and it came out pretty good and I had all of the chrome done a couple of years back and the speedo/tacho rebuilt by Peter Horton on here. I did have a NOS speedo but sold it to fund the rest of the project.
Fast forward to this week and I am now putting the engine together. I had about 4 cranks for this bike (very unique crank with 'plummer' type block main bearings .. totally different to the later 5-speed... more like a Honda race crank. I gave these to my mate Graham Curtis and he totally restored one and I gave him the remains. I was lucky in that I found newly rebored cylinder barrels and NOS pistons that had been matched to the rebore in a lock-up that the Crawley guy had rented (he was in his 80's and passed away and his son from London was selling the stuff off). Cams and followers are always mega hard to find for these and the exhaust cam always seems to pickup on one cam lobe. I found a a lovely inlet cam and a set of four really nice rockets/followers in all of the parts but all of the exhaust cams had a least one pit. During lock-down I sold some race type valves for a CB350K to Cappellini , who do parts for 1960's Hondas in Italy and he gave me decent money for them. I started a dialogue with him and gave him a Bomber rear brake pedal.... To my amazement, totally out of the blue, he posted me a pristine exhaust cam and some of his camchain tensioner sprocket repair kits and a magnetic sump plug that they sell . What a kind gesture !
Anyway, I am all set to finally put the engine together but I have discovered that the the nuts for the crank main bearing studs are not listed in any parts book and neither are the nuts for the crankcase halves retaining studs. I have researched this and found that the nuts are not standard ISO M6 and M8 nuts. The washers are not listed either but I am being told that the crank studs didn't have washers and the M6 crankcase ones are thinner than normal Honda ones (possibly Form 'C' is a match). From what I can glean the M6 nuts are standard 10mm A/F but are deeper than 'standard' ones . .i.e. just under 6mm rather than around 5mm as pictured below. I reckon the crank retainer nuts are probably deep M8's with 14mm A/F hex. I have found that deep M6 nuts and deep M8 nuts are used on classic Lambretta scooters .. so I am investigating as a possible source. I have also seen Honda nuts from the 1960's (fasteners not people ;D) having one side bevelled and the opposite side almost flat
Anyone on here restored a Bomber engine and have any recollection of this please?
[attachimg=1]
-
Great story Ash. Got to admire your dedication to the cause and spending so long finding parts worldwide that are so rare.
How do you find the leads to these bikes and us this the same guy who had the CB250 (was it a G5?) that you found in a shed a couple of years ago?
I wish I could help you with the fasteners you are looking for but the only advice I could offer (and you have probably explored this anyway) but DSS has a Bomber in his museum, would this be able to offer some details or is his Bomber a later one?
Looking forward though to seeing some photos of this build, it's going to be a good thread 👍
-
Great story Ash. Got to admire your dedication to the cause and spending so long finding parts worldwide that are so rare.
How do you find the leads to these bikes and us this the same guy who had the CB250 (was it a G5?) that you found in a shed a couple of years ago?
I wish I could help you with the fasteners you are looking for but the only advice I could offer (and you have probably explored this anyway) but DSS has a Bomber in his museum, would this be able to offer some details or is his Bomber a later one?
Looking forward though to seeing some photos of this build, it's going to be a good thread 👍
Yes Dave... as well as the Bomber in bits, I got my '64 CB72 also in bits, '69 G reg CB250K0 and another H reg in bits, a complete Bomber (I sold to Roy on here), 305 mile only CX500 and a 2k mile CB250G5 all in a delipidated shed, with it's roof caved in.. It was mid winter and the council were moving in to clear the property the next day and sadly I had to leave behind another Bomber, CB77, CB250T, 250 G5 plus CJ engines, forks, frames etc .. all in bad condition but broke my heart to leave them, Crawley is a long way from East Yorks and I felt another trip might have finished me and the van off. The guy (a passed away Chinese engineer in his 80's) also had a house full of model planes, dozens and dozens of VHS/Betamax recorders, Hi-fi, etc etc. God knows what was in the locked main bedroom and loft. I did OK out of it so no complaints at all really.
Look at these 400 carbs I got from there ... they were from a 600 mile only write off .. you could say badly stored !
[attachimg=1]
-
Hi Ash
Well that's great you got all the bikes and bits out ha.......... I look forward to all your build...... Funny enough I was out Dave silvers on saturday we went out me on My 67` bomber and my two mates one on a CB77 and his dad On a CL305.
I have still got to take some pictures of the Bomber Ash as I did say I would show you some when I finished it...... still got a few running probs but other than that she is Great and I love riding it.
-
Great back story and pics Ash! Holy, those carbs, what a shame when they had hardly done anything.
-
Hi Ash
Well that's great you got all the bikes and bits out ha.......... I look forward to all your build...... Funny enough I was out Dave silvers on saturday we went out me on My 67` bomber and my two mates one on a CB77 and his dad On a CL305.
I have still got to take some pictures of the Bomber Ash as I did say I would show you some when I finished it...... still got a few running probs but other than that she is Great and I love riding it.
Mo, I think you're on the David Silver Facebook page. 😎
https://www.facebook.com/share/p/hScRSWJrVyPLkCRb/
-
are yeah ..... Thats Mine and my mates lol
:D :D
Not Great pictures as old phone :-[
-
Very nice bike Mo👍. The engine looks like it's been hewn from a solid block of alloy 🙂
-
Thanks dave
Went out today for a 30 mile trip for a coffee go`s a Treat.
loads of people don't even know what it is..... one bloke today said what is it..........he had a Triumph T shirt on and was about 50 he should Know ha ;D
-
Lovely looking bike Mo - a crowd puller.🏍ï¸🏍ï¸🏍ï¸
-
Great looking bike - and your mates too
Sent from my iPhone using Tapatalk
-
That's a lovely example Mo.... someone did a really good job on the resto.
Only things I can see non-standard (apart from indicators which are a really sensible addition) are the gear lever and alternator cover. I think the silencers are DS pattern ones .. how do they sound?
-
Very nice looking bike Mo!
-
Hi Thanks everyone I tried My best ;D
are ok Ash I did Not know that the leaver was wrong or the case........... I wonder if anyone has them parts I could get hold of to put that right ?
Cheers
Mo
just seen this and I see they are wrong Now :-[
-
The original gear pedal was tubular in construction Mo and bent easily gouging the generator cover if the bike fell over. Both items are pretty rare to get hold of. I managed to get a NOS cover and I had an original gear pedal rechromed.
I wouldn't worry about it too much ..only anoraks like me would notice. Your later cover is worth a few bob anyway as all of the 450/500T covers get easily damaged and fetch a good price if unscathed.
One thing you do have is the correct 'Elephant' horn which is a rare item to find in decent nick
-
Are Ok Ash
I will leave as is then ;D
yes and they are loud horns too ha, I have one more cover but that is a bit scratched up I will see if I can get it out without going over the top trying to polish it out as some people do.
the other thing you asked was the silencers yes they are DS and they do sound great on the over run when you come in to a corner and shut down ..... also I took the baffles out and drilled a few more holes in them Not made it to loud but it do make it even better on that shut down ;D
Oh the other thing the indicators I made up some S/tubes on the lathe and found some indicators that looked close to Honda`s ones just to be a bit safer .......... and I don`t think they look to much out of place.
-
I had a look for that other Alt case and it is the same one as is on there now Ash, pity at least that would have made it a bit More complete ha