Honda-SOHC

Other Stuff => Desperately Seeking!! => Topic started by: SteveD CB500K0 on March 31, 2025, 11:14:30 AM

Title: One for the “Rubber Washer” gurus
Post by: SteveD CB500K0 on March 31, 2025, 11:14:30 AM

I’m hoping one of you guys can help me source a load of replacement rubber washers for my son’s dining chairs.

(https://uploads.tapatalk-cdn.com/20250331/5bd96519c558ab9b35e2cbfaaa8e562c.jpg)

They are 21mm OD, 15mm ID and 5mm thick. They act as shock absorbers between the trendy plastic bucket seat and the cantilevered legs.

I’m assuming they need to be soft as they squeeze up between two plates. This example is hard as rock and cracked.

I need 24 (6 on each chair).

Thanks in advance.

Steve


Sent from my iPhone using Tapatalk

Title: Re: One for the “Rubber Washer” gurus
Post by: kent400 on March 31, 2025, 04:52:03 PM

A thought on that, a computer mouse mat and a wad punch. The foam ones are 5 mm thick and although my largest wad punch is 19 mm one that size might do the job or maybe you can source a larger one.

Title: Re: One for the “Rubber Washer” gurus
Post by: Bryanj on March 31, 2025, 05:05:28 PM

Steve, ebay item 273087237790 does all sizes of hole punch, probably others but thats the first i found doing 15 and 20mm.
Then a sheet of what i know as insetion rubber which has reinforcing, hard wood block and hammer and you are away

Title: Re: One for the “Rubber Washer” gurus
Post by: Bryanj on March 31, 2025, 05:09:11 PM

Rubber sheet on fleabay

Title: Re: One for the “Rubber Washer” gurus
Post by: Deano400 on March 31, 2025, 08:27:34 PM

Would these be close enough, would have to use two on each.

https://www.rubberwashers.co.uk/M2_M36_Rubber_Washers/M14_Rubber_Washers/W0540

Title: Re: One for the “Rubber Washer” gurus
Post by: JamesH on April 04, 2025, 01:02:45 PM

Steve - try this:

https://www.vital-parts.co.uk/rubber-washers-706-p.asp

https://www.vital-parts.co.uk/15mm-x-21mm-x-3mm-neoprene-rubber-washer-32716-p.asp