Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: florence on April 01, 2025, 11:12:37 AM
-
Hello all,
I am about to put new oil and filter in my bike and thought it might be a good idea to look at my clutch at the same time.
Can anyone recommend where to buy clutch plates, springs and gasket. I was thinking EBC might be a good choice but keen to seek opinions here before I part with hard cash. I've been meaning to do this job for ages as my clutch slips and I want to get it right first time.
Many thanks,
Steve
-
Steve, my first 500 always slipped from standing start, well it did when i tried hard! Never wore out though.
One thing i would say is do not fit hd springs the clutch is heavy enough as it is plus probably change the steels as welk if you are going that far
-
Dont know it these are decent prices but from motorcycle products, i have used them nothing to do with me!
-
Thank you Bryan
Annoyingly, mine slips when I change down to overtake things and accelerate hard. It seems worse lately so going to try this. I have tried adjustments and cables etc. so this is the next step.
-
thank you, ordered.