Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: Alexandlinda on April 20, 2025, 04:32:36 PM

Title: Front Spindle assembly on a 750 K6
Post by: Alexandlinda on April 20, 2025, 04:32:36 PM: A liitle knowledge needed please. I noticed a little movement in the front wheel and found sideways play on the spindle of about 5mm. I seem to have everything in place but wonder if the spacer is just too small. Any advice would be appreciated.
Title: Re: Front Spindle assembly on a 750 K6
Post by: Bryanj on April 20, 2025, 09:50:43 PM: You have the nut on the wrong way round, hexagon goes against spacer.
You aint the first and wont be the last
Title: Front Spindle assembly on a [emoji239[emoji2393]][emoji2393]0 K[emoji2394]
Post by: JamesH on April 21, 2025, 12:41:10 PM: For reference, if you’re ever unsure or want to sanity check yourself on assembly sequence, CMSNL is a good resource for exploded diagrams. I’ve restored many Hondas, Kawasakis, Suzukis over the years and still refer back to these from time to time.
Title: Front Spindle assembly on a [emoji239[emoji2393]][emoji2393]0 K[emoji2394]
Post by: JamesH on April 21, 2025, 12:42:59 PM: Link here : https://www.cmsnl.com/honda-cb750k6-four-usa_model14380/partslist/F09.html

Sent from my iPhone using Tapatalk Pro
Title: Re: Front Spindle assembly on a 750 K6
Post by: Bryanj on April 21, 2025, 05:14:12 PM: James, have you noticed cmsnl have dropped the fits other models link?
Title: Re: Front Spindle assembly on a 750 K6
Post by: Seabeowner on April 21, 2025, 07:52:40 PM: Quote from: Bryanj on April 21, 2025, 05:14:12 PM
James, have you noticed cmsnl have dropped the fits other models link?
Yes that was very useful.
And I had to change my password and also all my Bookmarks no longer work so I have to delete and do again.
Title: Re: Front Spindle assembly on a 750 K6
Post by: JamesH on April 22, 2025, 09:50:45 AM: Quote from: Bryanj on April 21, 2025, 05:14:12 PM
James, have you noticed cmsnl have dropped the fits other models link?

Hi Bryan - I hadn't until you mentioned it. That's bloody annoying - I used to use that a lot!
Title: Re: Front Spindle assembly on a 750 K6
Post by: ST1100 on April 22, 2025, 12:41:52 PM: Quote from: Bryanj on April 21, 2025, 05:14:12 PM
... have you noticed cmsnl have dropped the fits other models link?
Yeah, this and the [my models] library, most inconvenient... (did have 7 models stored there... :-\ )
Already contacted their support, they assured me that it will clear up after the transition to their new system... one can only hope...
Title: Re: Front Spindle assembly on a 750 K6
Post by: SteveD CB500K0 on April 23, 2025, 06:34:10 AM: I’m beginning to understand just how they feel.

New system.

Sent from my iPhone using Tapatalk
Title: Re: Front Spindle assembly on a 750 K6
Post by: ST1100 on April 23, 2025, 08:09:41 AM: Quote from: SteveD CB500K0 on April 23, 2025, 06:34:10 AM
I’m beginning to understand just how they feel.
Never change a running system... ever... ;)