Honda-SOHC
Other Stuff => Member 4 Sales => Topic started by: Bryanj on November 17, 2025, 07:42:43 PM
-
OK, i ordered from Japan a "bulk" roll of fuel pipe under Honda part number, unfortunately HMRC decided i needed to pay VAT and the usual post office charges.
This means cost to me is £10 per Meter so if any body wants some i will sell at cost PLUS whatever the post office charges to send it, i would guess minimum of large letter and possibly small parcel.
PM me what you want and i will work out cost
-
Xxxxx
-
Not sure, i will look on cmsnl for you
-
Hi Bryan.
I'll buy 1 metre please. Always handy to have some decent fuel pipe.
Let me know the cost and I'll use PayPal 👍.
Cheers
Dave
-
Hi Bryan,
I’ll take some pls, enough for the two lines on a 550k1 apologies not sure on the length possibly you’ll know.
Im not 100% certain, I believe the Honda part number contains the length of the petrol pipe in mm.
-
If it's genuine Honda hose, part number 95001-550-0160M, then I'm in for a metre please.
Please confirm.
-
Hi Bryan
same for me as Jond, enough for two lines on a 500, many thanks
let me know how you want to be paid pls
-
Ted, the part number on the 550 is the 8mtr bulk role, which if you order in UK is over £200!
Thats why i bought from Japan on fleabay
-
For Skoti, a picture of the bag it came in
-
For Skoti, a picture of the bag it came in
Thanks for the photo.
PM sent.
-
Last spare piece went out last week, if enough people are interested (at least 5) i will order another roll and do same, end price will depend on HMRC but hopefully same,
-
Ted, the part number on the 550 is the 8mtr bulk role, which if you order in UK is over £200!
Thats why i bought from Japan on fleabay
Different to the 500 then Bryan, the two petrol pipe part numbers in my downloaded manual are shown as:-
95001-55180-40 (detailed as 5.5 x 180)
95001-55300-40 (detailed as 5.5 x300)
Presumably as you say not now supplied except in a roll.
I used replacement Gates Petrol pipe as previously fitted to the 500 I bought from you. (Gerben supplied?)
-
You are correct Ted, searching on cms can be frustrating as not shown in some models and they dont list all the part numbers for some models
-
For reference genuine Honda fuel hose in metre lengths
Part number – Inside dia – Appearance
95001-3500160M – 3.5mm – Black
95001-3500150M – 3.5mm – Black, braided exterior
95001-4500160M – 4.5mm – Black
95001-4500150M – 4.5mm – Black, braided exterior
95001-5500160M – 5.5mm – Black
95001-5500150M – 5.5mm – Black, braided exterior
95001-7500160M – 7.5mm – Black
95001-7500150M – 7.5mm – Black, braided exterior
From DS web site, but normally available postage free from your local Honda dealer or Honda powersports shop (lawn mowers and stuff use the similar hose).
link to page:
https://www.davidsilverspares.co.uk/tubes/ (https://www.davidsilverspares.co.uk/tubes/)
Got my last lot from Bryanj tho
-
Well done scoti, i never found those part numbers, did you check the 5.5?
Fowlers want about £25 plus vat and postage or roughly double what i wanted!
-
The Gates pipe is 6 mm, I used spring clips for safety.
-
Definately Ted, clips on 5.5 are belt n braces but on 6 necessary