Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: Dolomite_ on October 13, 2026, 09:01:55 AM

Title: Are there any differences between the pillion foot pegs on the F1 and F2
Post by: Dolomite_ on October 13, 2026, 09:01:55 AM

Finally getting around to putting some rear foot pegs on my 400 four. I know they changed the location of the rear foot pegs on the F2 model but are there physically any differences between the foot pegs or are they the same?

Title: Re: Are there any differences between the pillion foot pegs on the F1 and F2
Post by: Laverda Dave on October 13, 2026, 09:17:36 AM

They are the same, only the location differs.

Title: Re: Are there any differences between the pillion foot pegs on the F1 and F2
Post by: Nurse Julie on October 13, 2026, 09:23:29 AM

Honda changed the footpeg location during the F production. From VIN 1056883, they were frame mounted,VIN's earlier than that were swing arm mounted. You mention F1, is yours a Canadian or USA import as we didn't get the F1 here in UK, only F and F2.
Anyways, I can't remember if the actual footrests are different but the fiché on CMS will confirm the part numbers.

Title: Re: Are there any differences between the pillion foot pegs on the F1 and F2
Post by: Dolomite_ on October 13, 2026, 11:29:11 AM

Thanks Both. I'll triple check on CMS and get some bought.

Ah, I didn't realise it's F and F2 in the UK. I just assumed F1.

Mine is a UK bike. Made in 1977 so it's an F2.