Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: boxerdog1 on May 04, 2012, 12:13:34 PM

Title: Rhino Horn Top Triple Tree pinch bolt torque settings.
Post by: boxerdog1 on May 04, 2012, 12:13:34 PM

Looking for correct torque settings for the three pinch bolts - have new set of the very essential spacers but cannot find specific torque settings in any of reference data available . May be the torques quoted at 32.5 - 39.8 pounds foot under 'Front Fork Bolt' within torque table within the www.salocal.com site but I need to clarify if this is actually referring to the above three bolts in question !!

These top yokes are becoming extremely rare and expensive hence my concern to get torque spot on .

Any help would be greatly appreciated.

Title: Re: Rhino Horn Top Triple Tree pinch bolt torque settings.
Post by: Spitfire on May 05, 2012, 10:24:29 AM

I do not know which model and year of bike that you have but here are the numbers for the CB750F2, they should be the same for most CB750's.

(http://i192.photobucket.com/albums/z244/DennisMcc/FRONTFORKSPARTLISTANDTORQUESETTINGS.jpg)

Cheers

Dennis

Title: Re: Rhino Horn Top Triple Tree pinch bolt torque settings.
Post by: Spitfire on May 05, 2012, 12:15:28 PM

More

(http://i192.photobucket.com/albums/z244/DennisMcc/GENERALTORQUESETTINGS.jpg)

Title: Re: Rhino Horn Top Triple Tree pinch bolt torque settings.
Post by: boxerdog1 on May 05, 2012, 12:44:42 PM

Cheers Dennis - really useful set of data.