Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: Bitsa (Ralph Wright - RIP) on December 06, 2012, 03:42:42 PM

Title: cb500 manifolds
Post by: Bitsa (Ralph Wright - RIP) on December 06, 2012, 03:42:42 PM

Anyone want a set of manifolds for 500/4.The rubbers are hard and the clamps are serviceable all 8
Tenner plus post
Cheers
Bitsa

Title: Re: cb500 manifolds
Post by: Bryanj on December 06, 2012, 04:29:07 PM

I'll give you that for the clips, you can bin the rest!

Title: Re: cb500 manifolds
Post by: Bitsa (Ralph Wright - RIP) on December 07, 2012, 09:59:26 AM

emailed you Bryanj
Cheers
Bitsa

Title: Re: cb500 manifolds
Post by: bomber on June 30, 2013, 12:44:26 PM

Hello
I wonder if you still have manifold.
I just realised i need to replace my right one, as the thread is stripped so it blows thru 3rd pipe and i cant balance carbs...

Thanks

Title: Re: cb500 manifolds
Post by: Bitsa (Ralph Wright - RIP) on June 30, 2013, 12:57:03 PM

Hi Bomber
Sorry I did sell them,Cant remember to who but I do think it was to Bryan.Try emailing him he only wanted the bands.
Cheers
Bitsa

Title: Re: cb500 manifolds
Post by: mickwinf on June 30, 2013, 02:12:21 PM

Bomber I am sure I have one if you are stuck.

Title: Re: cb500 manifolds
Post by: bomber on June 30, 2013, 10:49:32 PM

Thank you for swift replay.
It seems like whenever I make a small progress on my bike I'm finding another problem...
Joy of fixing classics...

Mickwinf, I'm stuck :) can you check if you got one for 3rd and 4th cilinder?
In the mean time I will send email to Bryan.

Many thanks!

Title: Re: cb500 manifolds
Post by: mickwinf on July 01, 2013, 09:02:43 AM

yes I have one and threads are good £5 including post paypal is ok mickwinfrey@tiscali.co.uk

Title: Re: cb500 manifolds
Post by: bomber on July 02, 2013, 09:43:43 AM

Quote from: mickwinf on July 01, 2013, 09:02:43 AM

yes I have one and threads are good £5 including post paypal is ok mickwinfrey@tiscali.co.uk

Sweet!
Is this for 3/4 or are they the same?

Title: Re: cb500 manifolds
Post by: mickwinf on July 02, 2013, 12:14:48 PM

it is definitely 3/4 cyl as I checked it against my bike, I do have a pair if you need two. regards Mick