Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: buxtonmick on February 18, 2013, 10:31:43 AM

Title: Handlebar switch assembly
Post by: buxtonmick on February 18, 2013, 10:31:43 AM

I know this is a long shot but can anyone help with reassembling the handlebar switches, namely the R/H one.  I've possibly lost a ball bearing (along with a few marbles...) and I've got a little clip type thing from somewhere.  I took ref pics during disassembly but of course springs and things pooped out when I was least expecting it.  :-[

Cheers, Mick.

Title: Re: Handlebar switch assembly
Post by: buxtonmick on February 18, 2013, 12:14:25 PM

Sorted it - yet again trying to figure something out for an hour, go and do something else for a bit, come back and look again and it just clicks  ::)

Title: Re: Handlebar switch assembly
Post by: ashewan on February 18, 2013, 04:30:01 PM

Hi,
I have sometimes found the US site to be very useful (http://forums.sohc4.net/)
In the case of the switch you might like to check this out even though you have now solved it.

    Single Over-Head Cam 4 Forums »
    Tech Forums »
    Proven Tricks & Tips / How To's - NOT for Questions »
    Electrical (Moderator: Gordon) »
    Topic: Assembly and Discussion of the Right-hand Switch (a rebuilder's guide)

It is very American....
Andrew

Title: Re: Handlebar switch assembly
Post by: SteveD CB500K0 on February 18, 2013, 06:30:00 PM

That guy should be writing textbooks! (American textbooks...)

http://forums.sohc4.net/index.php?topic=80532.msg901194#msg901194

Title: Re: Handlebar switch assembly
Post by: buxtonmick on February 18, 2013, 11:15:34 PM

Wow!  That's an absolutely superb tutorial for anyone like myself who needs to strip the assemblies down for repainting etc., very well put together.