Honda-SOHC

Other Stuff => Misc / Open => Topic started by: Bitsa (Ralph Wright - RIP) on June 04, 2013, 12:29:12 PM

Title: Cb750 left hand side panel.
Post by: Bitsa (Ralph Wright - RIP) on June 04, 2013, 12:29:12 PM

Hi All.
For a while I have been looking for this and all I can find is overpriced and cracked to hell.
Did PO take them off with crow bars?I only want it as a spare so my question is has anyone got one for sale and if not has anybody bought these replicas?All your views most welcome.
Cheers
Bitsa

Title: Re: Cb750 left hand side panel.
Post by: mick on June 04, 2013, 02:11:50 PM

Hi Bitsa the LPM ones are supposed to be good very supple compared to the brittle old ones  ;) cheers Mick.

Title: Re: Cb750 left hand side panel.
Post by: Bryanj on June 04, 2013, 06:20:42 PM

I've had 500 LPM ones and they are better than original as they are not a Hard plastic

Title: Re: Cb750 left hand side panel.
Post by: Green1 on June 04, 2013, 06:38:12 PM

Hi Bitsa
LPM panals are far superior
I put my knee through the origanal the first time I used the main stand and it shattered beyond repair
I will be geting the origanal repaired gold ones back soon so just got to remember to be a bit careful as they are very brittle

Cheers Mick

Title: Re: Cb750 left hand side panel.
Post by: Bitsa (Ralph Wright - RIP) on June 04, 2013, 07:03:50 PM

Thanks guys,
Excuse my ignorance but do I take the LPM ones is what DSS and mnsl supply?
I have seen replicas all over various eBay sites and price varies considerably.
Again many thanks
Bitsa

Title: Re: Cb750 left hand side panel.
Post by: Green1 on June 04, 2013, 07:20:05 PM

Hi Bitsa
I got mine direct from LPM It saved me about £1 ;D
http://lpmreplicaparts.com/honda/CB750K1/sidep.html

Title: Re: Cb750 left hand side panel.
Post by: Bitsa (Ralph Wright - RIP) on June 05, 2013, 10:17:56 AM

Cheers to all.
Bitsa