Honda-SOHC

Other Stuff => Tricks & Tips => Topic started by: RGP750 on February 24, 2014, 09:00:00 PM

Title: Removing chewed up phillips screw
Post by: RGP750 on February 24, 2014, 09:00:00 PM

Having stripped my 750 into a million parts the weekend and
with the help from my son to remove the engine decided to take the breather casting off
seized up front screw,the only one i have come across during the strip.
 My son showed me a great way to remove it.
Drill a hole in the top 2.5mm dia or so ,tap  a torx bit into the hole,attach
ratchet handle and hey presto out it came.
Might be of use if you get stuck.
Good luck Richard :)

Title: Re: Removing chewed up phillips screw
Post by: Ecks on March 30, 2014, 10:36:38 PM

Very clever, I'll have to add that one to the mental toolbox.

Title: Re: Removing chewed up phillips screw
Post by: RGP750 on March 31, 2014, 06:35:05 PM

works a treat ;)