Honda-SOHC
SOHC.co.uk Forums => CB350/400 => Topic started by: ka-ja on April 01, 2014, 09:20:36 AM
-
Hi all,
The new exhaust has spent two years residing on top of a wardrobe, the time has come to unwrap and fit------oh sh*t.
-
What type is it?
-
Looks like a BSK (Dutch maker I think) that I once had....
Are those headers fitted to the correct exhaust ports ??
-
Hi,
It's a Marshall Deeptone (Dutch) and the pipes are in the correct exhaust ports 1-1,2-2 etc., if you could see it, the pipes cannot go anywhere else and line up parallel, just a 50-60 mm gap between the two"pairs"---ken
-
************* APRIL 1ST **********************
:)
-
hi Clem2112,
It may have been April the first, but it was an expensive one----£300 for a piece of scrap!!!!!!!!!!!!!
-
It's not to bad I bet there is a custom exhaust firm out there that can make a couple new headers.
Not ideal I know but still salvageable.
-
Have you tried putting number 1 at the other end and working from that?
-
Hi all,
Perseverance has given a possible contact at the makers, two new pipes a strong possibility-----Ken
-
Hi all,
Update, the spare pipes arrived and with some hacksaw use I ended up with this end result.
A word of warning, anyone thinking of dealing with Raw Power Motorcycles, if things go wrong, you will be totally ignored once they realise you have a problem, despite my friendly first approach for help and saying I was willing to pay for said help!