Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: Liam on April 21, 2014, 08:01:45 PM

Title: point plate screws
Post by: Liam on April 21, 2014, 08:01:45 PM

Hi fellas…

Points fixing / back plate screws are pretty chewed up…  Anyone tell me the size for replacements?

Cheers

Title: Re: point plate screws
Post by: Trigger on April 21, 2014, 08:48:16 PM

5mmx12mm on a K2. Are you taking about the three that the plate turns on? Sorry adjusts on.

Title: Re: point plate screws
Post by: Bitsa (Ralph Wright - RIP) on April 21, 2014, 09:23:06 PM

Again spot on Trig but never did know the size for the points or 2-3 plate.Seen the 3 you have spoke about on ebay.de
Cheers
Bitsa

Title: Re: point plate screws
Post by: Liam on April 23, 2014, 07:23:41 PM

Cheers…  All are pretty "worn".  I'll check ebay out for replacements.

Title: Re: point plate screws
Post by: Bitsa (Ralph Wright - RIP) on April 23, 2014, 07:33:48 PM

I am fairly sure DS will have them
Cheers
Bitsa