Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: RGP750 on May 09, 2014, 10:22:28 AM

Title: K2 Tank badges
Post by: RGP750 on May 09, 2014, 10:22:28 AM

Is it possible to get the tank badges off  and re use them?
any clues as to the best way to do it welcome.
Cheers Rich

Title: Re: K2 Tank badges
Post by: mick on May 09, 2014, 11:29:47 AM

Hi Rich yeah you can remove the tank badges and re use them, they should be held on by two pins that go into little clips in the tank, you can either use something like a wall paper scraper or some thin string? just need to get behind and gently pry them off with out bending them  ;) cheers Mick.

Title: Re: K2 Tank badges
Post by: RGP750 on May 09, 2014, 01:52:35 PM

Thanks Mick.
Another job for this weekend,(seeing as it is supposed to rain).
Cheers

Title: Re: K2 Tank badges
Post by: Trigger on May 09, 2014, 04:54:45 PM

I use a bit of fishing line, in a hoop and feller blades. Got the fishing line tip from Oddjob.

Title: Re: K2 Tank badges
Post by: Bitsa (Ralph Wright - RIP) on May 09, 2014, 07:52:38 PM

Agree with all but usually I use feeler blades like Trig
Cheers
Bitsa

Title: Re: K2 Tank badges
Post by: RGP750 on May 09, 2014, 09:10:19 PM

Thanks Guys, let you know how it goes.
Rich

Title: Re: K2 Tank badges
Post by: RGP750 on May 10, 2014, 04:52:20 PM

Piece of cake thanks .025" feeler gauge job done ;D