Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: dieffe on February 01, 2015, 09:01:12 PM
-
I have been playing with the engine on the K1. cleaned the head, lapped the valves, new stem seals and put it back together after a general clean.
Trouble is I have run out of new cross head bolts and have still got the transmission cover to fit. Does anyone know where to get just the odd few or better still, anyone who does whole engine kits?
Here's how far I've got.
(http://img.photobucket.com/albums/v161/dieffe123/Bikes/Engine2_zps62fa71b9.jpg)
-
Yamiya do a full kit or just order some off fleabay.
Forgot to mention: you can not get these machine screw in the small head. OEM only.
-
Saisei can get them
-
Just got some off ebay in stainless steel and for 6 x 90mm I bought 50 they cost me £23.00 free p/p I just cut them to the length I needed and they look just like the originals
-
Hondaking
Can you post the link for those screws off ebay please
Phil
-
Stainless into alloy... A recipe for disaster unless you use copperslip grease on the threads.
-
All copper slip covered and old stainless allen bolts removed after being in for 13 years Copper slip was still on old bolts
-
Hondaking
Can you post the link for those screws off ebay please
Phil
Hi Phil, I got a load of nuts and bolts from these people, they seemed fine to me and there is quite a variety.
http://www.mrmegapack.co.uk/motorcycle-megapacks-15-c.asp