Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: dieffe on March 02, 2015, 10:02:14 AM

Title: K1 rear wheel bush
Post by: dieffe on March 02, 2015, 10:02:14 AM

I have discovered another problem with this rebuild. I got the bike in bits and inevitably there are bits missing.
What I have found is that I am missing a bush/spacer that sits between the sprocket carrier and the wheel (item 13)
If anyone happens to have their bike apart and could measure one for me so that I could get one made that would be fantastic.

(http://img.photobucket.com/albums/v161/dieffe123/Bikes/New%20bikes/Rear%20wheel%20sleeve_zpsnap4heod.jpg)

If anyone happens to have a spare one they could sell me that would be even better.  :)

Thanks in advance.

Dave

Title: Re: K1 rear wheel bush
Post by: RGP750 on March 02, 2015, 01:00:41 PM

Hi
I will look at the parts list when i get home but the
one on my K0 is plain not stepped and is 33.96mm od 20.08 id and 18.26 mm thick.
Rich

Title: Re: K1 rear wheel bush
Post by: RGP750 on March 02, 2015, 01:07:46 PM

Sorry scrap the last reply i was looking at number 9 ,i'll try and sort it
tomorrow
Rich

Title: Re: K1 rear wheel bush
Post by: RGP750 on March 02, 2015, 01:56:58 PM

Hope this is the right one.
Rich

Title: Re: K1 rear wheel bush
Post by: dieffe on March 02, 2015, 09:00:11 PM

It doesn't get much better than that, that is absolutely brilliant, thanks very much Rich.
One more thing though, I may as well be ultra cheeky, what material do you think I should make it out of, mild or stainless?

Title: Re: K1 rear wheel bush
Post by: mike the bike on March 02, 2015, 09:30:49 PM

It's great the help we get from fellow members,  I went on the Katana forum to ask if someone could measure their tank decal for a GS650G.  I didn't get one single reply.

Title: Re: K1 rear wheel bush
Post by: RGP750 on March 02, 2015, 09:32:40 PM

Either really as it is out of sight.
I will check tomorrow to see if it has been hardened,meant to do it today
but customers got in the way.
Rich

Title: Re: K1 rear wheel bush
Post by: dieffe on March 02, 2015, 09:53:25 PM

Quote from: mike the bike on March 02, 2015, 09:30:49 PM

It's great the help we get from fellow members,  I went on the Katana forum to ask if someone could measure their tank decal for a GS650G.  I didn't get one single reply.

I had exactly the same thing on a Kawasaki forum. I needed some info about my 1100 Zephyr and got absolutely nothing back.  :(

Title: Re: K1 rear wheel bush
Post by: RGP750 on March 03, 2015, 11:02:26 AM

Hi the bush is not hardened.
cheers Rich

Title: Re: K1 rear wheel bush
Post by: dieffe on March 03, 2015, 06:33:35 PM

Thanks again Rich, mild steel it is then.  :)

Title: Re: K1 rear wheel bush
Post by: dieffe on March 08, 2015, 11:36:23 PM

Got one made, thanks again for your help Rich.

(http://img.photobucket.com/albums/v161/dieffe123/Bikes/New%20bikes/IMG_1521_zpsgvguzjr1.jpg)

Title: Re: K1 rear wheel bush
Post by: RGP750 on March 09, 2015, 06:42:19 AM

Looks good.
another bit nearer  :D

Title: Re: K1 rear wheel bush
Post by: Bitsa (Ralph Wright - RIP) on March 09, 2015, 10:23:27 AM

Does look good but Rich would have done it in his sleep going on the one he made me, ;)
Cheers
Bitsa