Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: steven400/4 on March 17, 2015, 04:54:32 PM

Title: crank
Post by: steven400/4 on March 17, 2015, 04:54:32 PM

i know no how to work out what shell you need for a crank . i was told the shells are matched to the cases aswell as the crank is this right???? i am just thinking as i have a crank with no marks on it but it has a good set of shells with it . plus i have a set of cases witch has no crank i have never put these two together. can someone tell me if the shells are match to just the crank or the cases as well???

Title: Re: crank
Post by: tom400f on March 17, 2015, 05:09:49 PM

Shells are matched to crank and cases. Marks are on both as here http://www.dotheton.com/forum/index.php?topic=31541.1800

Then this chart as attached. Lots written up about it elsewhere on here I think.

Title: Re: crank
Post by: Bryanj on March 17, 2015, 05:28:24 PM

There are always marks on the crank, just a swine to find and see

Title: Re: crank
Post by: steven400/4 on March 17, 2015, 05:34:50 PM

i know how to work it out tom but thanks bryanj the marks have come off on the crank plus its been lighten,d and the holes are where the marks should be

Title: Re: crank
Post by: mike the bike on March 17, 2015, 06:15:02 PM

You'll need some plastigage then