Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: JustcallmeMrT on March 27, 2015, 09:18:32 PM

Title: Rear hub spacer orientation
Post by: JustcallmeMrT on March 27, 2015, 09:18:32 PM

Hey folks, can anyone tell me which way around this goes into the rear hub?   Seems like the end with the longer fingers should go towards the drive side, but want to confirm before I put the bearings in.
(http://tapatalk.imageshack.com/v2/15/03/27/ff759e6ac0fdfc269a69c339b6767909.jpg)

Title: Re: Rear hub spacer orientation
Post by: mike the bike on March 27, 2015, 09:40:43 PM

The fingers are there to keep the spacer centred so you can get the axle in.
With that in mind it should become obvious