Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: clive on July 13, 2015, 09:37:58 AM

Title: clutch push-rod seal
Post by: clive on July 13, 2015, 09:37:58 AM

got a oil leak from seal on push rod on left side of engine (behind clutch casing) can the seal be extracted and replaced without parting the crank case's :-\s

Title: Re: clutch push-rod seal
Post by: Trigger on July 13, 2015, 09:42:31 AM

yes it can by screwing two self tapping screws into the seal and pull it out. Check to see if the push rod as not snapped, if it has I have new ones at members discount.

Title: Re: clutch push-rod seal
Post by: clive on July 13, 2015, 02:49:43 PM

thanks for that, be a while before i get round to it. :-*