Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PatM

Pages: [1] 2 3 ... 14
1
Other Bikes / Re: My other transport is a Spitfire!
« on: August 03, 2026, 07:05:02 AM »
I wouldnt do that- the engines go pop! :-)

2
Other Bikes / Re: My other transport is a Spitfire!
« on: August 02, 2026, 08:30:02 PM »
Spitfire experience too expensive for my tastes- but I too used to fly out of Rochester in the mid-80s when things were a bit more lapsed. To put things into significance- the owner of one of the planes was a fork-lift truck driver. The owner of the plane I flew was b=my next door neighbours- a Financier (thats someone who spends other peoples money, so he used to tell me)
My first bike that i was allowed to bike is 25 years old next week- it too has faired well (R1- Blue) and looks in better nick than my 400/4, which has passed through many hands and has been in mine since 2009. I shall hopefully take it for a spin this week but only if it cools down a bit.

3
Other Bikes / Re: My other transport is a Spitfire!
« on: August 02, 2026, 06:06:06 PM »
What I love about this forum is that from a simple photograph a torrent of interesting knowledge, snippets and anecdotes come forth. All very interesting points and observations.

Thank you all.
Yes, i love the banter! If your moniker is anything to do with lifts, i served my apprenticeship with them in the early 70's.  As for Honda 400/4's, Ive had 3 of the since 1980 something- They were either too expensive or too small for me and the Mrs, Life and kids got in the way and she 'banned' me from owning another bike after my big accident in '79. But that didn't stop me.
On Leverda Dave's comment- fantastic stuff. Im related to, by marriage to - Nigel Day. He's a very interesting chap to talk to about flying. obviously more modern kit, but he trained in Hawks, from memory. He's on Wiki if you dont know who he is. Ive not seen him since last year as time just slips by, doesn't it.
I must get my honda out- but with the builders her for at least another week- its locked by gawd knows what.

4
Other Bikes / Re: My other transport is a Spitfire!
« on: August 02, 2026, 03:26:05 PM »
On the Spitfire comment- I live near Leeds Castle in Kent and we see Spitfires doing those £3.5k trips most days- so as they say- someone's got money! When I was a kid, living in Welling- the only Spitfire I saw was the one hanging from fishing-line from my bedroom ceiling. occasionally, we would go out for a picnic in the car and pass biggin hill and see the 'gate guardians' - but when you consider i was born only 10 years after WW2 ended, they disappeared fairly quickly from the sky's, as vintage fighters or enthusiasts toys.

5
CB350/400 / Re: Really bad cold starting. Ign or fuel?
« on: March 22, 2023, 05:17:25 PM »
Thanks for the reply- Yes, they are the originals and I did attempt to remove one when I had the engine out some years ago, but gave up as damage was about to occur! Ive tried the WD40 around them but no change in pitch.

6
CB350/400 / Re: Really bad cold starting. Ign or fuel?
« on: March 22, 2023, 12:59:18 PM »
Im just going to add my tuppence-worth as mine does exactly this fault and ive never been able to find the reason behind it.

It will start like it did when it was brand new after its been running- but leave it a couple of hrs till it gets cold, and its a real bugger. its also running week on one pot, yet when I did a compression test, it was the same for all 4. Ive even tried another bank of carbs- and same problem.

Now, due to ill health and such personal reasons- Its not turned a wheel for nearly 3 years and I think the cam chain tensioner may be siexed- as the nut/bolt has been repalced at some time and loosening it has little effect. My fear is- snapping off bolt/studs- but my next move would be to tape the top cam cover off and check the cam-chain and horizontal mark to make sure its NOT a work cam-chain.

7
CB350/400 / Re: Exhaust Headers
« on: March 11, 2020, 03:07:26 PM »
Im sure the Firm I spoke to estimated my dress and re-chrome at between £400-600- They were Ashford Kent. Around the same time, someone reported a BN exhaust system had sold to a Japanese buyer for £2k...which is somewhat ironic considering it came from there.
Considering my bike cost me £595...I didnt bid on it!

8
CB350/400 / Re: Exhaust Headers
« on: March 11, 2020, 08:53:35 AM »
i had  1 and a half sets of downpipes but they were beyong saving. i agree, get the rest of the bike sorted- Mine was 2 years back together when I bought the DSS set. It depends what standard of  finish you are comfortable with- I had difficulty finding someone in Kent to re-chrome them without all sorts of caveats and objections..Youd have thought i was doing them a favour!

9
CB350/400 / Re: Exhaust Headers
« on: March 10, 2020, 05:45:59 PM »
I had the same issue when I bought my bike for £595 10 years ago-Quite apart form it being a non-runner-(carbs) it was looking very tired and neglected.

The exhaust system was the original and rusty in the same places as yours-I was a bit more aggressive than you and used a wire-cup but the chrome was long gone and the result a lot better that when I started! But, it wasn't chrome and on a bored day-Id polish it with Solvo and it would look like chrome!

Then I saw my brothers 400/4 and thought I better do something with having gone through the 'get it re-chromed' hurdle-I bit the bullet and bought a replica from DSS for about £350 form memory.

Happy days! Few would notice the clamps and single-wall-except as the years have ticked by, its blued a bit and yellowed...straw etc. But I was very happy with it. Took a long afternoon to fit though, but it was one of his first and I think they are a better fit now.

10
CB350/400 / Re: Shock absorbers etc
« on: March 09, 2020, 05:23:35 PM »
Brian- The Bike when I first put it back on the road- You can see the HAGON stickers- far too harsh!
(hopefully the snap uploaded)

11
CB350/400 / Re: Shock absorbers etc
« on: March 09, 2020, 03:17:17 PM »
For what its worth- mine came to me with HAGON copy-shocks, they were a lot heavier in size and had an unsightly sticker on them. Anyway, my brother rode my bike and said it was a horrible harsh ride and sold me his old ones- he had replaced his with OEMs some years back- I was pleased he did as there was little wrong with his ones that a bit of elbow grease didnt solve and the ride is and has been for the last 7 years, soft and confortable and not frame/bone jarring!

The HAGON shocks were a bit of a thing when the OEM onse started to show age (1980's?)and racers wanted that harder feel. I didnt and dont.

12
CB350/400 / Re: Cb400 four indicator wiring
« on: March 08, 2020, 01:34:34 PM »
One wire?- well, they must get their earth return from somewhere. Id put one of the indicators across a 12v supply to find out where. Also, if they are LEDs- that can throw up another conundrum (they only allow current to pass in one direction as they are diodes) . You might have to put your own earth returns in and connect up. Case to frame connection is notoriously troublesome.
I glad Julie knows the wire-colours of the rats-nest in the headlight bowl!

Side comment- Not much bike-riding going on in kent today..just had hailstones...Spring will come, but no sign of it this weekend- bikes to ride, bikes to polish...

13
CB350/400 / Re: CB400F2 with different electrics?
« on: March 05, 2020, 06:37:01 AM »
It looks like someones upgraded the rectifier with an aftermarket universal one. No reason why it wouldnt work ok as its only taking the a/c and converting it to DC to feed the electrics. It probably got better control over the output that the old one as the shunt-windings of the regulator on the OEM can be hit and miss after 40 years,  compared with a buck-converter Solid-state equivalent on a modern type.

14
CB350/400 / Re: Bargain for someone
« on: March 01, 2020, 06:53:42 PM »
WTF,  has the world gone mad, its worn rusty and missing teeth

Sent from my SM-G950F using Tapatalk

So am I!!!!!!

15
With my hands up (again) I did this to a 400/4 in the mid-80's and due to the amount of engines in breakers- resolved it with a new bottom-end complete. Id actually though Id put a wrong bolt- ie not from the original engine, rather than a mistake- but No, id clearly put the long bolt in the lower LHS and on strating the engine after a rebuild- suddenly there was a huge leak and a noise- then the engine cut..I did mention it once long ago on this Forum- as Ive had my present 400/4 for over 10 years now. Time flys...

Pages: [1] 2 3 ... 14