This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - RGP750
1
« on: June 13, 2024, 06:32:43 PM »
Thanks John I'll take a look at that.
2
« on: June 13, 2024, 05:23:59 PM »
HiAll
I'm rebuilding a 1971 cb125 twin and it should have 18 carbs (not literally) I have got my 20 carbs mixed up with them.
I believe the 18 and 20 is the choke size in MM .
where should I be measuring? is it the width through the inlet?
Cheers Rich
3
« on: May 19, 2023, 01:50:52 PM »
Well at last all is well.
I gave up on the 2 flasher units I bought, one on eBay and one from a local motor factors, (Lucas for M/C)
got a NOS Honda one from a mate , all is well going for a ride later.
Thanks for all of your input.
Rich
4
« on: May 17, 2023, 09:28:09 PM »
Thanks Brian I'll give that a try tomorrow.
Ted I have used 2 relays , both new and different makes with the same result.
5
« on: May 17, 2023, 05:26:01 PM »
Re the frame powder coating I have found the company I use I ask for 80% black it looks like the original and not over glossy.
6
« on: May 17, 2023, 05:19:32 PM »
All the bulbs are as they were before the flasher unit started blowing the fuse. Obviously tracked the relay down as the culprit. and bought
a new relay (well 2 actually both different makes) .I have tried reversing the black and grey and same result with both relays.
God I hate electrics
7
« on: May 17, 2023, 12:50:03 PM »
3 terminal as previous one.
8
« on: May 17, 2023, 07:16:24 AM »
Sorry just thought as I was talking about relay.
All 4 indicators are earthed , I'll try another new earth thanks .
Not an import it's a k1 from Steve admin.
9
« on: May 17, 2023, 06:50:00 AM »
Sorry not sure what you mean. Headlight is fine main and dip. . I don't have a headlight flash button . Right indicator turns front and rear indicators but not flashing and left is the same . I have tried another different unit and it's the same  ??
10
« on: May 16, 2023, 07:54:24 PM »
New conundrum
New flasher relay fitted , fuse didn't blow,
Eureka.
Next problem the lights
Don't flash :'( any thoughts please.
11
« on: May 14, 2023, 06:12:53 PM »
Yes everything fine, plug in relay and pop.
hope the new one works ok. I would have liked an original but can't find one.
Cheers Rich
yes well done Ted, I owe you one.
12
« on: May 14, 2023, 07:04:19 AM »
3 terminal Ted
13
« on: May 13, 2023, 07:41:30 PM »
think that's shot. mine was a repro only fitted 2 years ago. 
14
« on: May 13, 2023, 04:40:51 PM »
Don't want to rejoice just yet but it looks like the whole mess is down to a faulty Indicator relay.
I have ordered a new one and will report back.
Looks like Ted may get first prize.
Watch this space
Cheers all for your thoughts.
15
« on: May 13, 2023, 08:11:13 AM »
Thanks Brian just done this this morning. Disconnect block, check black live into headlight for continuity and all is fine , plug block in and it shorts. I then check black in sub loom and ok, check black on regulator ok. Something is happening when it is plugged in . ?¿
|
Show Posts
