This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Jan B
1
« on: July 14, 2025, 10:07:26 PM »
Motobatt here for 5 plus years without any issue. During winter on a ctek tricklecharger.
2
« on: February 08, 2025, 07:34:42 PM »
Very happy with the CTek in conjunction with the yellow brick battery over here.
3
« on: November 03, 2024, 07:58:16 PM »
Welcome Ken,
Looking forward to the pictures.
4
« on: October 26, 2024, 02:09:57 PM »
+1 for Redice decals. Excellent quality.
5
« on: October 21, 2024, 09:48:05 PM »
@Sesman, I haven't yet, but on the k2 (the early ones) there is a possibility to attach the clip to the caliperarm bracket. I'am still debating this soltution because the fastener comes very close to the rim.
6
« on: October 21, 2024, 09:22:57 PM »
I know we all love a piccie or two so here's one of my longterm project. It started almost 4 years ago. Spent some time with dismanteling, sourcing parts, rechroming some bits and bobs. The frame has been powdercoated. The orginal exhausts need some polishing and the battery needs to be fitted. Now I'am in the final stages of assembling.
Before:
[ Guests cannot view attachments ]
Now:
[ Guests cannot view attachments ]
7
« on: September 19, 2024, 07:51:28 PM »
Here also satisfied with Coni's
8
« on: September 15, 2024, 10:14:38 AM »
I use a "Ram Mount". Fits many phone models. Quick mounting and easy visual inspection on secure installation. No power supply though.
9
« on: August 27, 2024, 09:03:25 PM »
Welkom Mark..
You did the smart thing: buying a bike with spares
10
« on: August 19, 2024, 08:53:46 PM »
Loctite 5699
A thin smear will do the trick nicely. Avoid applying too much. Excess can end up in the oil galleries and cause oil starvation.
11
« on: May 27, 2024, 08:50:53 PM »
There is a service limit on the primary chain according to the service manual. Just measure the slack and then you can decide on splitting the cases or not.
12
« on: May 14, 2024, 06:10:13 PM »
Did you check the ohm-readings on the 3 stator wires? That will tell you something. The regulator is more likely to fail...
13
« on: April 26, 2024, 10:34:00 AM »
You must be chuffed.
What replacement bolt will you be using? There are non OEM bolts with a larger hex. Less change to get mangled.
14
« on: April 26, 2024, 10:21:06 AM »
Hi Kev,
Welcome aboard.
Finish the bike! With the help from the experts here will enjoy the build and the ride!
15
« on: March 20, 2024, 04:29:36 PM »
That's a very neat solution.
|
Show Posts