Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - DaveN

Pages: [1] 2 3 4
1
Member 4 Sales / Re: For Sale - 1977 400/4 SuperSport
« on: October 25, 2026, 01:45:13 PM »
SOLD as of 25th October 2026

2
Member 4 Sales / Re: For Sale - 1977 400/4 SuperSport
« on: September 18, 2026, 02:28:41 PM »
Great looking machine Dave.
Good luck with the sale Dave, hopefully you'll get a buyer as it's just about still summer.
Just a matter of interest, but why do you have an asterisk next to some of your other bikes, are they under restoration? If they are please start a project thread👍

They are the bikes I have owned since the age of 16, Dave. Just an indication of my rider history  ;)
I need to update that to include my WK 650TR, but as that is also up for sale now, I'm waiting to see which list to put it in.

3
Member 4 Sales / For Sale - 1977 400/4 SuperSport
« on: September 16, 2026, 05:23:15 PM »
Red 1977 Honda CB400/4 SuperSport
Total mileage: 30,714.5 miles
Refurbished at 29.824.3 miles in 2020
Mileage since refurbishment: 890.2 miles


Refurbished using mostly David Silver spares. Invoices and paperwork available

Please note, this is not a concours restoration project. It was refurbished to be a daily rider, so some chromed items have been powder-coated and the paint is a modern Honda Monaco Red. Unfortunately, ongoing hip joint problems made it uncomfortable for me to ride, hence the low mileage since completed. Garaged in Slough.

£4,000

5
CB350/400 / Re: Hello- is there any body out there?
« on: January 08, 2021, 01:17:12 PM »
Brrrrrrrr, it's cold :-)

6
CB350/400 / Re: Plugs / caps / HT leads
« on: December 29, 2020, 11:05:36 PM »
I got the correct plugs and caps from here:

[ Guests cannot view attachments ]

https://www.gsparkplug.com/ignition/spark-plugs

There are two different pattern plug-caps used, 2 90° and two at about 45°

7
CB350/400 / Re: MoT or Not?
« on: December 10, 2020, 02:37:37 PM »
Excellent points folks and well made.

My machine was put through an MoT after the restoration back in February just as a nuts-n-bolts check, but as I have yet to clock 1,000 miles in 10 months (I'm still running it in :-), I may well leave it until 2022 before another one.

8
CB350/400 / MoT or Not?
« on: December 03, 2020, 06:08:33 PM »
Hi Folks, just a quick straw-poll.

How many of you put their classic bikes through an MoT even if they are MoT Exempt?

Just curious :-)

9
CB350/400 / Re: What colour
« on: October 13, 2020, 05:12:08 PM »
I've finished my '77 reg 400F in the current Honda Milano Red which is a very close match to the original Light Ruby Red.

[ Guests cannot view attachments ]

I had the same confusion over was it it an F or F2 as it was first registered on 30th March 1977, but the frame/engine numbers are within the 400F UK range. I guess it was loitering in a showroom for a while.

10
CB350/400 / Re: Carbs overflow
« on: July 15, 2020, 11:18:27 PM »
If anybody needs some pins, I have a few  ;D

11
CB350/400 / Re: Front offside footrest
« on: July 06, 2020, 11:49:29 PM »
Hi Dave,
Just sneaked out to the toy cupboard and found one!
PM me with details and I'll send it to you.

Ian
Will do Ian and that would be most excellent

12
CB350/400 / Re: Front offside footrest
« on: July 06, 2020, 07:44:20 PM »
Cheers Ian, much appreciated  :)

13
CB350/400 / Re: Front offside footrest
« on: July 06, 2020, 04:30:29 PM »
Thanks Bryan,  I've had a look but CMSNL have them as unavailable. I had a search by the part number and no luck so far - just two other sources and both have it as discontinued.

One thing, looking at the picture on CMSNL, it shows a double leaf construction:

[ Guests cannot view attachments ]

I only have the 'inner' part so I guess that's why it's so weak.

It's a UK 1977 model by the way, but it seems to be a standard part across all markets.

14
CB350/400 / Front offside footrest
« on: July 06, 2020, 12:23:20 PM »
OK, I know that they are supposed to fold up to use the kick-starter, but mine flops about like a todger in a top hat!
The slightest snag on trouser or boot and it folds up only to be discovered when I try to rest my foot on it - oh what fun.
It has the circular flat spring installed but this only seems to lightly hold it up and has no tension to hold it down.
I presume it's knackered as I can re-shape it with finger pressure. Does anybody know if replacement springs are available?

Cheers for any advice.

15
CB350/400 / Re: Carbs overflow
« on: July 04, 2020, 11:00:11 PM »
All done!
Carbs off and cleaned up in a sonic bath courtesy of my neighbour Steve.

I think I may of found the issue with the sticking floats - one float pivot pin had the end sheared off and another was bent as a dog's back leg!

[ Guests cannot view attachments ]

Bought a set of the brass rods off of Amazon and cut new pins for all 4 carbs, float levels checked and matched and back on the bike this afternoon and runs like a dream with no overflow  ;D

Pages: [1] 2 3 4