1
Misc / Open / Re: Donations
« on: December 18, 2022, 10:07:44 AM »
Done
Charlie
Charlie
Try our re-instated info resource - "Aladdin's Cave" (Main menu)
- sorry it's taken so long to fix 
|
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 2
CB500/550 / Re: CB550 cafe racers with stock airbox« on: February 28, 2022, 08:48:47 PM »There is pictures of two flat tracker 550's with standard air boxes half way down this page >>http://www.sohc.co.uk/index.php/topic,24825.75.html I don’t know if this helps, but here are a couple of photos of my bike with the stock seat that has been shaved down and re-covered. The frame has not been cut and the airbox is retained. [ Guests cannot view attachments ] [ Guests cannot view attachments ] 3
Misc / Open / Motorcycle ergonomics« on: February 04, 2022, 08:20:33 PM »
Just found a great website that simulates riding positions for various bikes relative to rider height. Unfortunately, it doesn’t take girth into account !!
https://cycle-ergo.com 4
Misc / Open / Re: Petition« on: December 24, 2021, 10:50:33 AM »
Electric bike < 250 watts
Electric moped >250 watts < 4kw Electric motorcycle > 4kw With regard to electric scooters, it is illegal to use privately owned ones on the road. Hired ones can be used in the areas where the government has allowed trials to take place but are limited to 15.5 mph. There is a teenage girl who lives near me who rides an electric scooter on the road and regularly passes me when I'm doing 30 mph! It may be illegal, but it looks great fun! I did far worse things when I was a teenager. Those were the days. 5
Misc / Open / Re: Is there a scanner that can work out cubic centimetres?« on: December 14, 2021, 06:41:23 PM »
Now why didn’t I think of that
6
Misc / Open / Re: Is there a scanner that can work out cubic centimetres?« on: December 14, 2021, 03:43:44 PM » It can get quite complex, even more so if you put rugosity (surface roughness) into the equation.But here’s a link to a useful guide and calculator from Caswell Plating that may be of help. https://caswellplating.com/surface.html 7
Misc / Open / Re: Is there a scanner that can work out cubic centimetres?« on: December 14, 2021, 09:30:00 AM »
Rather than trying to visualise it. Try this exercise.
Take a steel cube 100mm x 100mm x 100mm and work out the surface are and volume. Now slice the cube in half to give two pieces 100mm x 100mm x 50mm and now work out the total volume and surface area of the two pieces. You will find that whilst the volume remains the same, the surface area will have increased by over 30%. So the displacement method for determining surface area isn’t remotely accurate even for non complex shapes. I’ll let you do the actual maths which will clearly demonstrate the point 8
Misc / Open / Re: Is there a scanner that can work out cubic centimetres?« on: December 14, 2021, 08:57:28 AM »
To give a simpler example and always remembering that Volume = Mass/Density
Take a ball of dough which will have a given mass and density and therefore volume. If you rolled it out as flat as you can it would still have the same mass, density and volume as the ball but a much larger surface area. 9
Misc / Open / Re: Is there a scanner that can work out cubic centimetres?« on: December 14, 2021, 08:53:31 AM »
Modified the post to say 2mm to correct the 2cm typo. Unfortunately, not before you had read it.
10
Misc / Open / Re: Is there a scanner that can work out cubic centimetres?« on: December 14, 2021, 08:39:02 AM »Or, "The density of steel is in the range of 7.75 and 8.05 g/cm3 (7750 and 8050 kg/m3 or 0.280 and 0.291 lb/in3). The theoretical density of mild steel (low-carbon steel) is about 7.87 g/cm3 (0.284 lb/in3). Unfortunately it's not that simple. Volume = mass/density. So two objects with the same mass and density will have the same volume. However, two objects with the same mass and density can have two completely different surface areas. For example, a cube of mild steel measuring 1cm x 1cm x1cm would indeed have a mass of 7.87 gm/cm3. However, if you hammered the cube into a plate say 2mm thick, it would have the same mass, the same density and therefore the same volume but a much larger surface area. Probably the simplest and cheapest means of determining the surface area of a complex shape is to cover the surface area with tin foil and then flatten out and measure the tinfoil. 11
Misc / Open / Re: Is there a scanner that can work out cubic centimetres?« on: December 14, 2021, 12:03:38 AM »
I’m not sure that would work, as displacement is related to volume and not surface area. You could work out cubic centimetres by this method but not square centimetres. Two objects can have the same volume but different surface areas.
12
Misc / Open / Re: Is there a scanner that can work out cubic centimetres?« on: December 13, 2021, 11:41:41 PM »
I have some experience of using 3D scanners for measuring surface area of aggregate particles in a laboratory. I know that 5 years ago you would have to pay at least £10k for one good enough to do what you are asking. I’m sure prices will be cheaper now but still a fairly heavy investment.
14
Recommended Sources for Parts and Services / Re: Rear brake drum relining« on: December 05, 2021, 03:31:26 PM »
I obviously haven’t got the hang of posting photos yet! Photo 2 is “after†and the others are during the machining process.
15
Recommended Sources for Parts and Services / Rear brake drum relining« on: December 05, 2021, 03:16:19 PM »
I had a problem with a cracked rear brake drum lining on my CB500 K1 causing pulsing through the brake lever. I tried a number of machine shops asking if the could machine out the old liner and refit a new one using a car brake drum as a blank. Nobody seemed interested in the job either because it was a one off or because it wasn’t something they had done before. I even tried a couple of “Motorcycle Restoration Specialists†who told me the job couldn’t be done and I would have to get a replacement hub. Eventually, I came across a guy called Dave Baker who was extremely helpful and happy to take on the job. I provided him with a car brake drum from GSF Car Parts (part no 600VG0040) that cost £16.29 incl delivery. Dave charged me £60 for machining out the old liner, and cutting the new brake drum for a shrink fit.
I’ve attached a few photos of the process and showing the new liner after fitting. If anyone find themselves in the same situation as me and struggles to find someone to do the job, I can recommend Dave. He is based in Ammanford in west Wales 07463 550559 [ [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ] |