This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - MrBaklava
Pages: [1]
1
« on: January 15, 2025, 04:30:26 PM »
Thanks for all the comments folks,
I've given it a proper clean and sanded all contact points. Reassembled carefully and it still doesn't work.
Very weird - it's as if the circular dial is a few degrees out when the unit is assembled. I can get the ignition to turn on when using only the plastic part at the bottom, but when I insert this back into the key mechanism (that has an asymmetric male tab) the key won't turn the ignition on.
I guess they do wear out, and that's why those replacements are available!
If it comes to it, I'll order one from the USA, but ideally I could get this fixed asap. Thanks for sharing the links!
2
« on: January 14, 2025, 07:00:06 PM »
Thanks for your responses everyone.
I traced a fault to the lower section of the ignition switch (white plastic section) as mentioned by Brianj.
Does anyone know where I can pick up a new one? ideally just the plastic so I can retain my original keys.
Also the bike is a 79 CB550k with the steering lock on the headtube rather than on the ignition.
Thanks again to all that helped out!
[ Guests cannot view attachments ]
3
« on: January 14, 2025, 02:22:22 PM »
Just checked and the bike does fire when the starter solenoid is bridged.
If it is the ignition at the key side, can it be removed and repaired or must it be replaced?
4
« on: January 14, 2025, 01:59:21 PM »
Hey folks,
Having a little problem with my 78 CB550...
Yesterday when I turned the ignition key on, no lights illuminated, until I flicked the key off and on again. Today i can't get the ignition to come on at all.
I popped the plug from the back of the ignition and bridged the wires to bypass the switch and there were no changes - the bike is still playing dead.
All battery connections look clean and free from corrosion, and I can't see any blown fuses.
Any ideas?
5
« on: May 24, 2023, 03:13:37 PM »
What are the largest tyres I can fit on the CB550 whilst retaining the original front and rear mudguards.
And, does anyone have any photos or 500/550s with chunky tyres?
Thanks in advance.
6
« on: March 05, 2023, 08:05:57 PM »
Hey there,
I had an incident the other day with a front wheel lock - it snapped 4 nipples and bent 4 spokes. The bike is a Cb550k with the twin disc conversion on the front.
Does anyone know where I can buy individual spokes? It seems like a waste to order an entire pack for £90. Potentially I can straighten the spokes and just order nipples, if that's an option?
I'm based in East London, and would be up for taking it to a shop for someone to complete the repair, if someone can advise on a mechanic.
Thanks in advance
7
« on: January 30, 2023, 03:30:44 PM »
As above.
I've got a new CB550k project that I'm working on at home. Would be nice to know of good bike mechanics in the area, or friendly bike people that are local.
Thanks,
8
« on: January 08, 2023, 07:05:38 PM »
Thank you for the welcome.
The green bike I posted appears to have a shorter saddle than my 550. I've also seen a few CB550s on the net that have a saddle that's shorter than mine.
Does anyone know if the 550k saddle was longer than others?
9
« on: January 08, 2023, 06:32:28 PM »
And here is the bike that made me stop in my tracks, and decide to retain the original seat, avoid chopping the frame and go for some more subtle modifications.
The image quality is poor, but can anyone advise on the handlebars used here?
10
« on: January 08, 2023, 06:28:35 PM »
Today I picked up my first motorcycle for the road. A 1978 CB550k.
I found an old advert on Facebook marketplace, naff photos, no details in the ad. I thought it would be worth sending a quick message with an offer (the ad was 16 weeks old) - now here we are.
The condition is beautiful. It has 11 former keepers, and 37k on the clocks, which I think might be a lot for a bike? who knows.
The plan is to service it, change a few bits such as the massive indicators, and huge caravan-esque rear light, get a smaller metal numberplate. I initially wanted to turn this into a brat style bike, but I have fallen in love with it's originality. It also helped that I spotted a bike online that manages to keep the original features of the guards and seat, whilst tidying it up the rear end.
I'll work on it over the next couple of months - aiming to have my license by March. [ Guests cannot view attachments ]
Pages: [1]
|