This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Madagas2002
1
« on: October 17, 2024, 04:19:22 PM »
Hi All, I put an earth wire to the engine from the battery negative terminal. The bike cranked over no problem. I then took off the engine plate which has the main earth wire. Cleaned off some of the stove enamelling and presto it cranked over no problem. Thank you all for your advice and help. Kind Regards John
2
« on: October 17, 2024, 09:24:00 AM »
I used a refurb kit on the starter and I always thought it sounded slow, but no nasty noises. I probably need to take the starter motor off (or hook a battery directly to it) and see if that's the problem.
Would a jump starter pack work instead of a battery?
3
« on: October 17, 2024, 08:39:55 AM »
Hi All, Thanks for your help. I put a wire across the solenoid terminals and got a spark, but the starter motor didn't turn.
4
« on: October 16, 2024, 09:13:01 PM »
Hi All,
The starter motor on my bike is refusing to turn over. The solenoid is clicking but nothing at the motor. All the other electrics are working. I've also checked the earths. The battery is fully charged. A curious thing is the kick start turns, but is sticking, which it has never done before. Could these issues be related? Thanks in advance for any help and advice. John
5
« on: September 23, 2024, 01:47:11 PM »
Hello, Can anyone please tell me the size of t-bolt clamp I need for a standard exhaust to silencer. I'm measuring the diameter to be around 50mm (almost 2"). Thanks in advance. John
6
« on: August 22, 2023, 05:51:33 PM »
Hi, I ordered a rear sprocket by JT When I tried to fit it the inner ring seemed too wide compared to the original sprocket. The original measured about 9mm, The JT sprocket was 11mm https://imgur.com/a/jtQKqCLHas anyone come across this issue
7
« on: August 16, 2023, 09:54:50 PM »
Hello, yes I know they are quite hard to find. Your price is no unreasonable so I'll be in touch when I'm ready to start the rebuild. Many thanks John
8
« on: August 16, 2023, 05:24:57 PM »
Hello, thanks for your help. Can I please get back to you on your offer. I'm in the middle of a top end rebuild so the switch is on my list. Thanks again John
9
« on: August 15, 2023, 09:24:01 PM »
Steve got back to me and he's sold the last one. John
10
« on: August 15, 2023, 08:03:51 PM »
Many thanks. I've mailed Steve.
11
« on: August 15, 2023, 05:17:21 PM »
Hello, While trying to remove the neutral switch it snapped. The OEM part is 35750-333-013 or 023. I'm told that the parts are discontinued. There are some on Ebay.uk for an ss50 that look very similar. The part no is 35750-333-020. Has anyone got an opinion if this will fit or can suggest Where I can get one. Thanks in advance John
12
« on: June 04, 2023, 07:12:07 PM »
Hi, Many thanks. I have this, but I wasn't clear if the headlight wiring went over the top of the frame left over to right, just above the coils. Best REgards John
13
« on: June 04, 2023, 01:53:24 PM »
Hi All, Can anyone point me in the direction of how the wiring harness is routed at the steering column. Any photos would be appreciated. https://imgur.com/EEkJRGcThanks in advance. John
14
« on: May 01, 2023, 11:09:01 AM »
Hi, I was wondering if anyone had any supplier recommendations for a front wheel spoke set. I'm in the UK.
Thanks John
15
« on: April 23, 2023, 12:45:13 PM »
Many thanks.
|