1
CB500/550 / Re: carb setting
« on: September 07, 2026, 11:28:17 PM »
thanks Ted for getting back to me and showing me the link cheers
Try our re-instated info resource - "Aladdin's Cave" (Main menu)
- sorry it's taken so long to fix 
|
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 1
CB500/550 / Re: carb setting« on: September 07, 2026, 11:28:17 PM »
thanks Ted for getting back to me and showing me the link cheers
2
CB500/550 / Re: carb setting« on: September 07, 2026, 11:25:16 PM »
cheers bryanj wasn't 100% sure I read the older post correctly so thank you for pointing me in the right direction cheers
3
CB500/550 / carb setting« on: September 07, 2026, 09:10:53 PM »
hi everyone I have a 1974 cb550f with 022a carbs I read somewhere that when you are setting the slide height you turn the tick over screw fully off first then set the slide gap not sure if I read the post right but I am in the process of cleaning the carbs and wanted to be sure before I set the gap any help would be great cheers.
4
CB500/550 / Carb spares« on: September 07, 2026, 08:14:51 PM »
Hi good people I was wondering if Julie still sells spare parts for carbs any info would be great cheers
6
CB500/550 / spark plugs« on: February 20, 2025, 10:52:43 PM »
I have a 1974 cb550k which has a boyer ignition fitted, i was led to believe that the ignition fired all 4 plugs at the same time if this is the case the silly question is does it matter what plug leads go to a particular plug regarding firing order thanks for any advice.
7
CB500/550 / Re: airbox rubbers« on: February 20, 2025, 12:19:37 AM »
when i received the package the description was for a 500f as you suggested Bryanj but like i said a perfect fit
8
CB500/550 / Re: airbox rubbers« on: February 18, 2025, 08:05:11 PM »
thanks Bryanj but i got sorted with D.Silver 39 pounds with next day delivery have them fitted on the bike perfect fit again thanks for your reply.
9
CB500/550 / Re: airbox rubbers« on: February 15, 2025, 03:53:26 PM »
cheers Bryanj for your quick reply, as for postage costs i think d.silver would be the best bet so again thank you.
10
CB500/550 / airbox rubbers« on: February 15, 2025, 03:36:15 PM »
looking for suggestions for best place to get replacement airbox to carb rubbers for a 1974 550k cheers for any help offered.I am based in N.Ireland so have to take postage into consideration.
11
CB500/550 / Re: float valves« on: January 28, 2025, 12:24:55 AM »
thanks Oddjob for your offer but i got sorted with one thanks again.
12
CB500/550 / Re: float valves« on: January 23, 2025, 11:45:23 PM »
cheers guys will check them out
13
CB500/550 / float valves« on: January 23, 2025, 08:38:40 PM »
Hi everyone back again for more advice, i have a 1974 cb550 with a Keihin 022A carb set on it when i was working on the carbs i damaged a float bowl valve the small plunger got stuck in the valve body, my silly mistake, the valves are the metal pointed ones not the rubber ones any idea where i can order the same or would the rubber pointed ones do the job, if so would i be better replacing all the valves with the rubber pointed ones or can i mix and match thanks for any advice you can give me cheers.
14
CB500/550 / Re: ignition« on: January 02, 2025, 10:52:16 PM »
just an update re. ignition, after i cleaned the contacts and re fitted the unit it seems to be working ok but will keep an eye on it to be sure, again thanks for all your advice and help.
15
CB500/550 / Re: fuel tap« on: December 27, 2024, 08:23:23 PM »
hi Sesman thanks for your input, will get the dictionary out to understand the lingo lol.I was wondering would it be possible to use a Y connector from the input lines going to the carbs and connect to the one outlet on the fuel tap thats working just a thought as not sure if the fuel feed would be enough to feed the carbs with only one fuel line working cheers.
|