Hondabond or not?

[Beddgelert]

I am starting to put my top end back together on my 550 and wondered if I should put some liquid gasket (hondabond etc) on along with the new gaskets?

It makes sense but I am just concerned that it will be a pig to separate them again in the future?

[Trigger]

NOOOOooooooooooooo, if the gaskets are a good make (NP or Vesrah) everything should be good.

[Green1]

It won't be a pig to pull apart but if you use it you will be pulling it apart agian in the near future

[JustcallmeMrT]

I used plain vesrah gaskets as per Triggers advice and all is well - no leaks!

Sent from my SM-N9005 using Tapatalk

[Bryanj]

Honda bond is ONLY for the metal to metal surfaces never on gaskets and don't even think of the silicone word

[Beddgelert]

Thanks for the advice guys,  I have some vesrah gaskets so all should be well.

What do they say about a little knowledge........!